rtc9
2.0.0.0
|
RTC 9 Click is a real-time clock module that has an extremely low power consumption, allowing it to be used with a single button cell battery, for an extended period of time. This board features the M41T82, real-time clock (RTC) with battery switchover, from ST Microelectronics.
We provide a library for the Rtc9 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Rtc9 Click driver.
void rtc9_cfg_setup ( rtc9_cfg_t *cfg );
RTC9_RETVAL rtc9_init ( rtc9_t *ctx, rtc9_cfg_t *cfg );
void rtc9_set_time( rtc9_t *ctx, uint8_t hour, uint8_t min, uint8_t sec );
This example demonstrates the use of RTC 9 click board.
The demo application is composed of two sections :
Initializes the driver, wakes up the module, and sets the time and date.
Reads the current time and date and displays the results on the USB UART each second.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.