Go to the documentation of this file.
39 #ifdef PREINIT_SUPPORTED
43 #ifdef MikroCCoreVersion
44 #if MikroCCoreVersion >= 1
49 #include "drv_digital_out.h"
50 #include "drv_digital_in.h"
73 #define LTEIOT8_CMD_AT "AT"
74 #define LTEIOT8_CMD_ATI "ATI"
75 #define LTEIOT8_CMD_CGMR "AT+CGMR"
76 #define LTEIOT8_CMD_CFUN "AT+CFUN"
77 #define LTEIOT8_CMD_CREG "AT+CREG"
78 #define LTEIOT8_CMD_CEREG "AT+CEREG"
79 #define LTEIOT8_CMD_CGDCONT "AT+CGDCONT"
80 #define LTEIOT8_CMD_CIMI "AT+CIMI"
81 #define LTEIOT8_CMD_CGATT "AT+CGATT"
82 #define LTEIOT8_CMD_CSQ "AT+CSQ"
83 #define LTEIOT8_CMD_CESQ "AT+CESQ"
84 #define LTEIOT8_CMD_COPS "AT+COPS"
85 #define LTEIOT8_CMD_CMGF "AT+CMGF"
86 #define LTEIOT8_CMD_CMGS "AT+CMGS"
87 #define LTEIOT8_CMD_CSCA "AT+CSCA"
88 #define LTEIOT8_CMD_SQNLED "AT+SQNLED"
106 #define LTEIOT8_RSP_OK "OK"
107 #define LTEIOT8_RSP_ERROR "ERROR"
108 #define LTEIOT8_RSP_SYSTART "+SYSSTART"
115 #define DRV_TX_BUFFER_SIZE 200
116 #define DRV_RX_BUFFER_SIZE 500
134 #define LTEIOT8_MAP_MIKROBUS( cfg, mikrobus ) \
135 cfg.tx_pin = MIKROBUS( mikrobus, MIKROBUS_TX ); \
136 cfg.rx_pin = MIKROBUS( mikrobus, MIKROBUS_RX ); \
137 cfg.rng = MIKROBUS( mikrobus, MIKROBUS_AN ); \
138 cfg.rst = MIKROBUS( mikrobus, MIKROBUS_RST ); \
139 cfg.cts = MIKROBUS( mikrobus, MIKROBUS_CS ); \
140 cfg.pst = MIKROBUS( mikrobus, MIKROBUS_PWM ); \
141 cfg.rts = MIKROBUS( mikrobus, MIKROBUS_INT );
void lteiot8_send_cmd_with_parameter(lteiot8_t *ctx, char *at_cmd_buf, char *param_buf)
Send command with parameters.
#define DRV_TX_BUFFER_SIZE
LTE IoT 8 driver buffer size.
Definition: lteiot8.h:115
digital_out_t rst
Definition: lteiot8.h:153
pin_name_t rst
Definition: lteiot8.h:182
uart_data_bits_t data_bit
Definition: lteiot8.h:191
void lteiot8_send_cmd(lteiot8_t *ctx, char *cmd)
Send command function.
pin_name_t cts
Definition: lteiot8.h:183
@ LTEIOT8_OK
Definition: lteiot8.h:203
void lteiot8_set_sim_apn(lteiot8_t *ctx, char *sim_apn)
Set SIM APN.
digital_in_t rng
Definition: lteiot8.h:157
void lteiot8_send_text_message(lteiot8_t *ctx, char *phone_number, char *message_content)
Send SMS message to number in text mode.
uart_stop_bits_t stop_bit
Definition: lteiot8.h:193
@ LTEIOT8_ERROR_TIMEOUT
Definition: lteiot8.h:205
void lteiot8_send_cmd_check(lteiot8_t *ctx, char *at_cmd_buf)
Send command to check commands current value.
uart_parity_t parity_bit
Definition: lteiot8.h:192
digital_in_t pst
Definition: lteiot8.h:158
err_t lteiot8_default_cfg(lteiot8_t *ctx)
LTE IoT 8 default configuration function.
pin_name_t pst
Definition: lteiot8.h:184
void lteiot8_cfg_setup(lteiot8_cfg_t *cfg)
LTE IoT 8 configuration object setup function.
bool uart_blocking
Definition: lteiot8.h:190
uint32_t baud_rate
Definition: lteiot8.h:189
@ LTEIOT8_ERROR_UNKNOWN
Definition: lteiot8.h:207
err_t lteiot8_generic_write(lteiot8_t *ctx, char *data_buf, uint16_t len)
LTE IoT 8 data writing function.
LTE IoT 8 Click configuration object.
Definition: lteiot8.h:175
@ LTEIOT8_ERROR
Definition: lteiot8.h:204
#define DRV_RX_BUFFER_SIZE
Definition: lteiot8.h:116
digital_in_t rts
Definition: lteiot8.h:159
LTE IoT 8 Click context object.
Definition: lteiot8.h:151
pin_name_t tx_pin
Definition: lteiot8.h:178
pin_name_t rx_pin
Definition: lteiot8.h:177
lteiot8_return_value_t
LTE IoT 8 Click return value data.
Definition: lteiot8.h:202
void lteiot8_send_cmd_syntax_check(lteiot8_t *ctx, char *at_cmd_buf)
Send command to check commands available parameters.
pin_name_t rng
Definition: lteiot8.h:181
pin_name_t rts
Definition: lteiot8.h:185
digital_out_t cts
Definition: lteiot8.h:154
uart_t uart
Definition: lteiot8.h:162
err_t lteiot8_init(lteiot8_t *ctx, lteiot8_cfg_t *cfg)
LTE IoT 8 initialization function.
err_t lteiot8_send_sms_pdu(lteiot8_t *ctx, char *service_center_number, char *phone_number, char *sms_text)
Send SMS message to number in pdu mode.
err_t lteiot8_generic_read(lteiot8_t *ctx, char *data_buf, uint16_t max_len)
LTE IoT 8 data reading function.
@ LTEIOT8_ERROR_CMD
Definition: lteiot8.h:206