Go to the documentation of this file.
39 #ifdef PREINIT_SUPPORTED
43 #ifdef MikroCCoreVersion
44 #if MikroCCoreVersion >= 1
49 #include "drv_digital_out.h"
50 #include "drv_digital_in.h"
51 #include "drv_i2c_master.h"
73 #define TEMPHUM17_REG_HUMIDITY_SENSOR_RESOLUTION_READ 0x06
74 #define TEMPHUM17_REG_HUMIDITY_SENSOR_RESOLUTION_WRITE 0x46
75 #define TEMPHUM17_REG_TEMPERATURE_SENSOR_RESOLUTION_READ 0x11
76 #define TEMPHUM17_REG_TEMPERATURE_SENSOR_RESOLUTION_WRITE 0x51
77 #define TEMPHUM17_REG_SENSOR_ID_UPPER_READ 0x1E
78 #define TEMPHUM17_REG_SENSOR_ID_LOWER_READ 0x1F
96 #define TEMPHUM17_CMD_ENTER_PROGRAMMING_MODE 0xA0
97 #define TEMPHUM17_CMD_DUMMY 0x00
98 #define TEMPHUM17_CMD_ENTER_MEASUREMENTS_MODE 0x80
115 #define TEMPHUM17_STATUS_VALID_DATA 0x00
116 #define TEMPHUM17_STATUS_STALE_DATA 0x01
133 #define TEMPHUM17_RESOLUTION_8_BITS 0x00
134 #define TEMPHUM17_RESOLUTION_10_BITS 0x01
135 #define TEMPHUM17_RESOLUTION_12_BITS 0x02
136 #define TEMPHUM17_RESOLUTION_14_BITS 0x03
143 #define TEMPHUM17_SET_DEV_ADDR 0x44
161 #define TEMPHUM17_MAP_MIKROBUS( cfg, mikrobus ) \
162 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
163 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA )
464 #endif // TEMPHUM17_H
err_t temphum17_enter_measurements_mode(temphum17_t *ctx)
Temp&Hum 17 enter measurements mode function.
err_t temphum17_wake_up(temphum17_t *ctx)
Temp&Hum 17 wake up function.
Temp&Hum 17 Click configuration object.
Definition: temphum17.h:189
err_t temphum17_init(temphum17_t *ctx, temphum17_cfg_t *cfg)
Temp&Hum 17 initialization function.
err_t temphum17_get_raw_data(temphum17_t *ctx, uint8_t resolution, int16_t *temp, uint16_t *hum, uint8_t *status)
Temp&Hum 17 get raw data function.
err_t temphum17_set_relative_humidity_resolution(temphum17_t *ctx, uint8_t resolution)
Temp&Hum 17 set relative humidity resolution function.
uint8_t slave_address
Definition: temphum17.h:180
uint32_t i2c_speed
Definition: temphum17.h:194
pin_name_t scl
Definition: temphum17.h:190
pin_name_t sda
Definition: temphum17.h:191
void temphum17_cfg_setup(temphum17_cfg_t *cfg)
Temp&Hum 17 configuration object setup function.
err_t temphum17_enter_programming_mode(temphum17_t *ctx)
Temp&Hum 17 enter programming mode function.
Temp&Hum 17 Click context object.
Definition: temphum17.h:173
err_t temphum17_generic_write(temphum17_t *ctx, uint8_t reg, uint8_t *tx_buf, uint8_t tx_len)
Temp&Hum 17 I2C writing function.
err_t temphum17_default_cfg(temphum17_t *ctx)
Temp&Hum 17 default configuration function.
i2c_master_t i2c
Definition: temphum17.h:176
err_t temphum17_set_temperature_resolution(temphum17_t *ctx, uint8_t resolution)
Temp&Hum 17 set temperature resolution function.
uint8_t i2c_address
Definition: temphum17.h:195
err_t temphum17_get_temp_hum(temphum17_t *ctx, uint8_t resolution, float *temperature, float *humidity)
Temp&Hum 17 get temperature and humidity function.
@ TEMPHUM17_OK
Definition: temphum17.h:205
@ TEMPHUM17_ERROR
Definition: temphum17.h:206
temphum17_return_value_t
Temp&Hum 17 Click return value data.
Definition: temphum17.h:204
err_t temphum17_generic_read(temphum17_t *ctx, uint8_t reg, uint8_t *rx_buf, uint8_t rx_len)
Temp&Hum 17 I2C reading function.