hallswitch2
2.0.0.0
|
<PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU>
[click Product page](<CLICK_PRODUCT_PAGE_LINK>)
We provide a library for the HallSwitch2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for HallSwitch2 Click driver.
hallswitch2_cfg_setup
Config Object Initialization function. hallswitch2_init
Initialization function. hallswitch2_check_state
This function checks the S and N pin states, which indicates a magnetic field poles. This example demonstrates the use of Hall Switch 2 click board.
The demo application is composed of two sections :
Initializes the driver and logger and makes an initial log.
Displays the corresponding message on the USB UART based on the switches state, i.e. based on the magnetic field presence.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.