dac11  2.0.0.0
Macros | Functions
main.c File Reference

DAC11 Click example. More...

#include "board.h"
#include "log.h"
#include "dac11.h"

Macros

#define REFERENCE_VOLTAGE   3.3
 
#define NUMBER_OF_STEPS   20
 

Functions

void application_init (void)
 
void application_task (void)
 
void main (void)
 

Detailed Description

DAC11 Click example.

Description

This example demonstrates the use of DAC 11 click board.

The demo application is composed of two sections :

Application Init

Initializes the driver and executes the click default configuration which sets the WRM mode and disables all outputs.

Application Task

Changes the output voltage of all channels every 2 seconds and logs the voltage value on the USB UART. It will go through the entire voltage range taking into account the number of steps which is defined below.

Note
Measure the voltage at VCC_SEL jumper and adjust the reference voltage value below for better accuracy.
Author
Stefan Filipovic

Macro Definition Documentation

◆ NUMBER_OF_STEPS

#define NUMBER_OF_STEPS   20

◆ REFERENCE_VOLTAGE

#define REFERENCE_VOLTAGE   3.3

Function Documentation

◆ application_init()

void application_init ( void  )

< Logger config object.

< Click config object.

◆ application_task()

void application_task ( void  )

◆ main()

void main ( void  )