powermonitor
2.0.0.0
|
<PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU>
[click Product page](<CLICK_PRODUCT_PAGE_LINK>)
We provide a library for the PowerMonitor Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for PowerMonitor Click driver.
powermonitor_cfg_setup
Config Object Initialization function. powermonitor_init
Initialization function. powermonitor_default_cfg
Click Default Configuration function. powermonitor_get_vshunt
Power Monitor get shunt voltage function. powermonitor_get_vbus
Power Monitor get bus voltage function. powermonitor_get_current
Power Monitor get current function. This library contains API for Power Monitor Click driver. The library initializes and defines the I2C bus drivers to write and read data from registers. The library also includes a function for reading Shunt and Bus voltage ( mV ), Current ( mA ), Power ( W ), Energy ( J ),
as well as the Temperature in degrees Celsius.
The demo application is composed of two sections :
The initialization of I2C module, log UART, and additional pins. After the driver init and then executes a default configuration, the app checks communication, display Manufacturer, Stores Device and Revision ID.
This is an example that shows the use of a Power Monitor Click boardâ„¢. Measures and displays Shunt voltage ( mV ), Bus voltage ( mV ), Current ( mA ), Power ( W ), Energy ( J ) and Temperature ( degrees Celsius ). Results are being sent to the USART terminal where the user can track their changes. This task repeats every 2.5 sec.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.