hallcurrent11
2.0.0.0
|
<PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU>
[click Product page](<CLICK_PRODUCT_PAGE_LINK>)
We provide a library for the HallCurrent11 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for HallCurrent11 Click driver.
hallcurrent11_cfg_setup
Config Object Initialization function. hallcurrent11_init
Initialization function. hallcurrent11_default_cfg
Click Default Configuration function. hallcurrent11_get_adc
Hall Current 11 ADC reading function. hallcurrent11_get_adc_voltage
Hall Current 11 get ADC voltage function. hallcurrent11_get_current
Hall Current 11 get current function. This library contains API for Hall Current 11 Click driver. The demo application reads ADC value and current ( A ).
The demo application is composed of two sections :
Initializes I2C driver and log UART. After driver initialization the app set default settings.
This is an example that demonstrates the use of the Hall Current 11 Click boardâ„¢. In this example, we read and display the ADC values and current ( A ) data. Results are being sent to the Usart Terminal where you can track their changes.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.