spirit2
2.0.0.0
|
SPIRIT 2 Click features the SP1ML-915, an ultra-low power, fully integrated RF module, which operates at 915 MHz ISM band. This Click boardâ„¢ can be used to add wireless connectivity to any application, requiring no extensive RF communication experience. The module integrates all the required components, including the 32-bit STM32L1 MCU, a compact chip antenna, and accompanying circuitry. The SP1ML-915 module supports several types of modulation schemes, including 2-FSK, GFSK, GMSK, OOK, and ASK, allowing it to fulfill different RF transmission requirements.
We provide a library for the SPIRIT2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for SPIRIT2 Click driver.
spirit2_cfg_setup
Config Object Initialization function. spirit2_init
Initialization function. spirit2_power_module
Function for power mode of SPIRIT 2 click. spirit2_reset
Function for reseting SPIRIT 2 click. spirit2_set_mode
Function for setting mode of SPIRIT 2 click. This example reads and processes data from SPIRIT2 2 clicks.
The demo application is composed of two sections :
Initializes driver and wake-up module.
Reads the received data and parses it.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.