Go to the documentation of this file.
35 #include "drv_digital_out.h"
36 #include "drv_digital_in.h"
37 #include "drv_spi_master.h"
59 #define EEPROM7_OPCODE_STATUS_RDSR 0x05
60 #define EEPROM7_OPCODE_STATUS_WRBP 0x08
61 #define EEPROM7_OPCODE_STATUS_WREN 0x06
62 #define EEPROM7_OPCODE_STATUS_WRDI 0x04
63 #define EEPROM7_OPCODE_STATUS_WRSR 0x01
69 #define EEPROM7_OPCODE_EEPROM_SECURITY_READ 0x03
70 #define EEPROM7_OPCODE_EEPROM_SECURITY_WRITE 0x02
71 #define EEPROM7_OPCODE_EEPROM_SECURITY_RDEX 0x83
72 #define EEPROM7_OPCODE_EEPROM_SECURITY_WREX 0x82
73 #define EEPROM7_OPCODE_EEPROM_SECURITY_LOCK 0x82
74 #define EEPROM7_OPCODE_EEPROM_SECURITY_CHLK 0x83
80 #define EEPROM7_OPCODE_MP_REG_RMPR 0x31
81 #define EEPROM7_OPCODE_MP_REG_PRWE 0x07
82 #define EEPROM7_OPCODE_MP_REG_PRWD 0x0A
83 #define EEPROM7_OPCODE_MP_REG_WMPR 0x32
84 #define EEPROM7_OPCODE_MP_REG_PPAB 0x34
85 #define EEPROM7_OPCODE_MP_REG_FRZR 0x37
91 #define EEPROM7_OPCODE_MP_REG_SPID 0x9F
97 #define EEPROM7_OPCODE_SW_RESET_SRST 0x7C
103 #define EEPROM7_SEC_WRITE_DISABLE 0x00
104 #define EEPROM7_SEC_WRITE_ENABLE 0x01
110 #define EEPROM7_PIN_WRITE_PROTECT_DISABLE 0x00
111 #define EEPROM7_PIN_WRITE_PROTECT_ENABLE 0x01
112 #define EEPROM7_PIN_HOLD_PROTECT_DISABLE 0x00
113 #define EEPROM7_PIN_HOLD_PROTECT_ENABLE 0x01
119 #define EEPROM7_STATUS_ERROR 0x00
120 #define EEPROM7_STATUS_SUCCESS 0x01
121 #define EEPROM7_DUMMY 0x00
122 #define EEPROM7_ENABLE_WRITE_DISABLE 0x00
123 #define EEPROM7_ENABLE_WRITE_ENABLE 0x01
124 #define EEPROM7_DEVICE_NOT_READY 0x00
125 #define EEPROM7_DEVICE_IS_READY 0x01
143 #define EEPROM7_MAP_MIKROBUS( cfg, mikrobus ) \
144 cfg.miso = MIKROBUS( mikrobus, MIKROBUS_MISO ); \
145 cfg.mosi = MIKROBUS( mikrobus, MIKROBUS_MOSI ); \
146 cfg.sck = MIKROBUS( mikrobus, MIKROBUS_SCK ); \
147 cfg.cs = MIKROBUS( mikrobus, MIKROBUS_CS ); \
148 cfg.wp = MIKROBUS( mikrobus, MIKROBUS_RST ); \
149 cfg.hld = MIKROBUS( mikrobus, MIKROBUS_PWM )
167 pin_name_t chip_select;
189 spi_master_mode_t spi_mode;
190 spi_master_chip_select_polarity_t cs_polarity;
eeprom7_return_value_t
EEPROM 7 Click return value data.
Definition: eeprom7.h:197
err_t eeprom7_generic_write_then_read(eeprom7_t *ctx, uint8_t *data_in, uint8_t len_in, uint8_t *data_out, uint8_t len_out)
EEPROM 7 data writing function.
EEPROM 7 Click context object.
Definition: eeprom7.h:157
err_t eeprom7_check_status(eeprom7_t *ctx, uint8_t check_bit)
Status register bits check function.
uint16_t eeprom7_read_status(eeprom7_t *ctx)
Read status function.
void eeprom7_write_memory(eeprom7_t *ctx, uint32_t addr, uint8_t *p_tx_data, uint8_t n_bytes)
Write EEPROM memory function.
err_t eeprom7_send_cmd(eeprom7_t *ctx, uint8_t cmd)
Send command function.
Definition: eeprom7.h:200
err_t eeprom7_default_cfg(eeprom7_t *ctx)
EEPROM 7 default configuration function.
void eeprom7_sw_reset(eeprom7_t *ctx)
Software device reset function.
err_t eeprom7_init(eeprom7_t *ctx, eeprom7_cfg_t *cfg)
EEPROM 7 initialization function.
void eeprom7_enable_hold_operation(eeprom7_t *ctx, uint8_t en_hold)
Enable hold operation function.
err_t eeprom7_generic_read(eeprom7_t *ctx, uint8_t reg, uint8_t *data_out, uint8_t len)
EEPROM 7 data reading function.
void eeprom7_cfg_setup(eeprom7_cfg_t *cfg)
EEPROM 7 configuration object setup function.
err_t eeprom7_generic_write(eeprom7_t *ctx, uint8_t reg, uint8_t *data_in, uint8_t len)
EEPROM 7 data writing function.
void eeprom7_enable_write(eeprom7_t *ctx, uint8_t en_write)
Enable write function.
uint8_t eeprom7_is_device_ready(eeprom7_t *ctx)
Check the device is ready function.
uint8_t eeprom7_get_status(eeprom7_t *ctx)
Get status function.
void eeprom7_read_memory(eeprom7_t *ctx, uint32_t addr, uint8_t *p_rx_data, uint8_t n_bytes)
Read EEPROM memory function.
EEPROM 7 Click configuration object.
Definition: eeprom7.h:174
Definition: eeprom7.h:199
void eeprom7_enable_write_protect(eeprom7_t *ctx, uint8_t en_write_protect)
Enable write protect function.
void eeprom7_set_status(eeprom7_t *ctx, uint8_t status)
Set status function.