Go to the documentation of this file.
35 #include "drv_digital_out.h"
36 #include "drv_digital_in.h"
37 #include "drv_i2c_master.h"
64 #define C6DOFIMU11_REG_WHO_AM_I 0x00
65 #define C6DOFIMU11_REG_CNTL2 0x3A
66 #define C6DOFIMU11_REG_INC3 0x2C
67 #define C6DOFIMU11_REG_ACCEL_XOUT_L 0x0A
68 #define C6DOFIMU11_REG_ACCEL_YOUT_L 0x0C
69 #define C6DOFIMU11_REG_ACCEL_ZOUT_L 0x0E
70 #define C6DOFIMU11_REG_MAG_XOUT_L 0x10
71 #define C6DOFIMU11_REG_MAG_YOUT_L 0x12
72 #define C6DOFIMU11_REG_MAG_ZOUT_L 0x14
90 #define I2CEXTEND2_EXTEND_DISABLE 0x00
91 #define I2CEXTEND2_EXTEND_ENABLE 0x01
97 #define I2CEXTEND_PIN_STATE_LOW 0x00
98 #define I2CEXTEND_PIN_STATE_HIGH 0x01
104 #define C6DOFIMU11_CNTL2_TEMP_EN_STANDBY_MODE 0x00
105 #define C6DOFIMU11_CNTL2_MAG_EN_STANDBY_MODE 0x00
106 #define C6DOFIMU11_CNTL2_ACCEL_EN_STANDBY_MODE 0x00
107 #define C6DOFIMU11_INC3_IEL2_FIFO_TRIG 0x20
108 #define C6DOFIMU11_INC3_IEL1_FIFO_TRIG 0x02
109 #define C6DOFIMU11_CNTL2_ACCEL_EN_OPERATING_MODE 0x01
110 #define C6DOFIMU11_CNTL2_GSEL_8G 0x00
111 #define C6DOFIMU11_CNTL2_RES_MAX2 0x0C
112 #define C6DOFIMU11_CNTL2_MAG_EN_OPERATING_MODE 0x02
113 #define C6DOFIMU11_WHO_AM_I_WIA_ID 0x2D
120 #define C6DOFIMU11_I2C_SLAVE_ADDRESS_GND 0x0E
121 #define C6DOFIMU11_I2C_SLAVE_ADDRESS_VCC 0x0F
139 #define I2CEXTEND2_MAP_MIKROBUS( cfg, mikrobus ) \
140 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
141 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
142 cfg.en = MIKROBUS( mikrobus, MIKROBUS_CS )
160 uint8_t slave_address;
294 #endif // I2CEXTEND2_H
i2cextend2_return_value_t
I2C Extend 2 Click return value data.
Definition: i2cextend2.h:183
void i2cextend2_rmt_multi_read(i2cextend2_t *ctx, uint8_t reg, uint8_t *p_rx_data, uint8_t n_bytes)
Generic multi read data in Remote Mode function.
void i2cextend2_rmt_write(i2cextend2_t *ctx, uint8_t reg, uint8_t tx_data)
Generic write data in Remote Mode function.
void i2cextend2_enable(i2cextend2_t *ctx, uint8_t en_extend)
Enable extend function.
void i2cextend2_rmt_multi_write(i2cextend2_t *ctx, uint8_t reg, uint8_t *p_tx_data, uint8_t n_bytes)
Generic multi write data in Remote Mode function.
err_t i2cextend2_init(i2cextend2_t *ctx, i2cextend2_cfg_t *cfg)
I2C Extend 2 initialization function.
void i2cextend2_cfg_setup(i2cextend2_cfg_t *cfg)
I2C Extend 2 configuration object setup function.
Definition: i2cextend2.h:186
I2C Extend 2 Click configuration object.
Definition: i2cextend2.h:167
I2C Extend 2 Click context object.
Definition: i2cextend2.h:150
Definition: i2cextend2.h:185
uint8_t i2cextend2_rmt_read(i2cextend2_t *ctx, uint8_t reg)
Generic read data in Remote Mode function.