Go to the documentation of this file.
35 #include "mikrosdk_version.h"
38 #if mikroSDK_GET_VERSION < 20800ul
39 #include "rcu_delays.h"
45 #include "drv_digital_out.h"
46 #include "drv_digital_in.h"
47 #include "drv_i2c_master.h"
74 #define C6DOFIMU11_REG_WHO_AM_I 0x00
75 #define C6DOFIMU11_REG_CNTL2 0x3A
76 #define C6DOFIMU11_REG_INC3 0x2C
77 #define C6DOFIMU11_REG_ACCEL_XOUT_L 0x0A
78 #define C6DOFIMU11_REG_ACCEL_YOUT_L 0x0C
79 #define C6DOFIMU11_REG_ACCEL_ZOUT_L 0x0E
80 #define C6DOFIMU11_REG_MAG_XOUT_L 0x10
81 #define C6DOFIMU11_REG_MAG_YOUT_L 0x12
82 #define C6DOFIMU11_REG_MAG_ZOUT_L 0x14
100 #define I2CEXTEND2_EXTEND_DISABLE 0x00
101 #define I2CEXTEND2_EXTEND_ENABLE 0x01
107 #define I2CEXTEND_PIN_STATE_LOW 0x00
108 #define I2CEXTEND_PIN_STATE_HIGH 0x01
114 #define C6DOFIMU11_CNTL2_TEMP_EN_STANDBY_MODE 0x00
115 #define C6DOFIMU11_CNTL2_MAG_EN_STANDBY_MODE 0x00
116 #define C6DOFIMU11_CNTL2_ACCEL_EN_STANDBY_MODE 0x00
117 #define C6DOFIMU11_INC3_IEL2_FIFO_TRIG 0x20
118 #define C6DOFIMU11_INC3_IEL1_FIFO_TRIG 0x02
119 #define C6DOFIMU11_CNTL2_ACCEL_EN_OPERATING_MODE 0x01
120 #define C6DOFIMU11_CNTL2_GSEL_8G 0x00
121 #define C6DOFIMU11_CNTL2_RES_MAX2 0x0C
122 #define C6DOFIMU11_CNTL2_MAG_EN_OPERATING_MODE 0x02
123 #define C6DOFIMU11_WHO_AM_I_WIA_ID 0x2D
130 #define C6DOFIMU11_I2C_SLAVE_ADDRESS_GND 0x0E
131 #define C6DOFIMU11_I2C_SLAVE_ADDRESS_VCC 0x0F
149 #define I2CEXTEND2_MAP_MIKROBUS( cfg, mikrobus ) \
150 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
151 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
152 cfg.en = MIKROBUS( mikrobus, MIKROBUS_CS )
303 #endif // I2CEXTEND2_H
i2cextend2_return_value_t
I2C Extend 2 Click return value data.
Definition: i2cextend2.h:195
uint8_t slave_address
Definition: i2cextend2.h:170
void i2cextend2_rmt_multi_read(i2cextend2_t *ctx, uint8_t reg, uint8_t *p_rx_data, uint8_t n_bytes)
Generic multi read data in Remote Mode function.
void i2cextend2_rmt_write(i2cextend2_t *ctx, uint8_t reg, uint8_t tx_data)
Generic write data in Remote Mode function.
void i2cextend2_enable(i2cextend2_t *ctx, uint8_t en_extend)
Enable extend function.
void i2cextend2_rmt_multi_write(i2cextend2_t *ctx, uint8_t reg, uint8_t *p_tx_data, uint8_t n_bytes)
Generic multi write data in Remote Mode function.
pin_name_t sda
Definition: i2cextend2.h:181
err_t i2cextend2_init(i2cextend2_t *ctx, i2cextend2_cfg_t *cfg)
I2C Extend 2 initialization function.
pin_name_t en
Definition: i2cextend2.h:183
void i2cextend2_cfg_setup(i2cextend2_cfg_t *cfg)
I2C Extend 2 configuration object setup function.
uint32_t i2c_speed
Definition: i2cextend2.h:185
digital_out_t en
Definition: i2cextend2.h:164
@ I2CEXTEND2_ERROR
Definition: i2cextend2.h:197
I2C Extend 2 Click configuration object.
Definition: i2cextend2.h:179
I2C Extend 2 Click context object.
Definition: i2cextend2.h:162
i2c_master_t i2c
Definition: i2cextend2.h:167
uint8_t i2c_address
Definition: i2cextend2.h:186
@ I2CEXTEND2_OK
Definition: i2cextend2.h:196
pin_name_t scl
Definition: i2cextend2.h:180
uint8_t i2cextend2_rmt_read(i2cextend2_t *ctx, uint8_t reg)
Generic read data in Remote Mode function.