cxpi
2.0.0.0
|
CXPI Click is a compact add-on board that contains a transceiver that supports the next-generation automotive communication protocol. This board features the BD41000AFJ-C, a transceiver for the CXPI (Clock Extension Peripheral Interface) communication from Rohm Semiconductor.
We provide a library for the CXPI Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for CXPI Click driver.
cxpi_cfg_setup
Config Object Initialization function. cxpi_init
Initialization function. cxpi_send_command
Send command. cxpi_set_pwm_pin_state
Set PWM pin state function. cxpi_set_through_mode
Set through mode function. This is an example that demonstrates the use of the CXPI Click board.
The demo application is composed of two sections :
Initializes UART driver. In addition to this module is placed inside transmitter/receiver working mode cappable of transmission/receive the data.
Transmitter/Receiver task depend on uncommented code Receiver logging each received byte to the UART for data logging, while transmitted send messages every 5 seconds.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.