buck16  2.0.0.0
Main Page

Buck 16 click

Buck 16 Click is a compact add-on board that contains a DC-DC power converter that steps down the voltage from its input to its output. This board features the TPS62912, a high-efficiency, low noise, and low ripple current-mode synchronous buck converter from Texas Instruments.

click Product page


Click library

  • Author : Luka Filipovic
  • Date : Sep 2021.
  • Type : SPI type

Software Support

We provide a library for the Buck16 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for Buck16 Click driver.

Standard key functions :

Example key functions :

Example Description

This example showcases ability of the device to

control voltage output of device. Output voltage can range from 800 to 5500 depending of VIN. By default it will go from 800 to 3300 VIN==VCC.

The demo application is composed of two sections :

Application Init

Initialization of communication modules (SPI, UART)

and additional pin for enabling output and sets it to high.

void application_init ( void )
{
log_cfg_t log_cfg;
buck16_cfg_t buck16_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_printf( &logger, "\r> Application Init <\r\n" );
// Click initialization.
buck16_cfg_setup( &buck16_cfg );
BUCK16_MAP_MIKROBUS( buck16_cfg, MIKROBUS_1 );
err_t init_flag = buck16_init( &buck16, &buck16_cfg );
if ( SPI_MASTER_ERROR == init_flag )
{
log_error( &logger, " Application Init Error. " );
log_info( &logger, " Please, run program again... " );
for ( ; ; );
}
buck16_enable_output( &buck16, 1 );
log_printf( &logger, "> Application Task <\r\n" );
}

Application Task

Sets voltage output first to 900mV then to 2500 mV.

Then disables and enables output by toggling pin. In the end sets output value to 1500mV.

void application_task ( void )
{
log_printf( &logger, " > Setting output to 0.9V\r\n" );
buck16_set_output( &buck16, 900 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
log_printf( &logger, " > Setting output to 2.5V\r\n" );
buck16_set_output( &buck16, 2500 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
log_printf( &logger, " > Disable output\r\n" );
buck16_enable_output( &buck16, 0 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
log_printf( &logger, " > Enable output\r\n" );
buck16_enable_output( &buck16, 1 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
log_printf( &logger, " > Setting output to 1.5V\r\n" );
buck16_set_output( &buck16, 1500 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Buck16

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.


buck16_t
Buck 16 Click context object.
Definition: buck16.h:150
buck16_enable_output
void buck16_enable_output(buck16_t *ctx, uint8_t enable)
Enable/Disable voltage output.
BUCK16_MAP_MIKROBUS
#define BUCK16_MAP_MIKROBUS(cfg, mikrobus)
MikroBUS pin mapping.
Definition: buck16.h:135
buck16_cfg_t
Buck 16 Click configuration object.
Definition: buck16.h:165
application_task
void application_task(void)
Definition: main.c:69
buck16_set_output
err_t buck16_set_output(buck16_t *ctx, uint16_t vout)
Set output voltage.
application_init
void application_init(void)
Definition: main.c:35
buck16_init
err_t buck16_init(buck16_t *ctx, buck16_cfg_t *cfg)
Buck 16 initialization function.
buck16_cfg_setup
void buck16_cfg_setup(buck16_cfg_t *cfg)
Buck 16 configuration object setup function.
buck16_set_potentiometer
err_t buck16_set_potentiometer(buck16_t *ctx, uint16_t rwb)
Set potentiometer resistivity.