altitude5
2.0.0.0
|
<PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU>
[click Product page](<CLICK_PRODUCT_PAGE_LINK>)
We provide a library for the Altitude5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for Altitude5 Click driver.
altitude5_cfg_setup
Config Object Initialization function. altitude5_init
Initialization function. altitude5_default_cfg
Click Default Configuration function. altitude5_get_altitude
Altitude 5 get altitude function. altitude5_get_pressure
Altitude 5 get pressure function. altitude5_get_adc_voltage
Altitude 5 get ADC voltage function. This library contains API for Altitude 5 Click driver. The demo application reads ADC value, calculate pressure and altitude.
The demo application is composed of two sections :
Initializes I2C or analog driver and log UART. After driver initialization the app set default settings.
This is an example that demonstrates the use of the Altitude 5 Click boardâ„¢. In this example, we read ADC values and display the Pressure ( mBar ) and Altitude ( m ) data. Results are being sent to the Usart Terminal where you can track their changes.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.