ambient15
2.0.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the Ambient15 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for Ambient15 Click driver.
ambient15_cfg_setup
Config Object Initialization function. ambient15_init
Initialization function. ambient15_default_cfg
Click Default Configuration function. ambient15_set_atime
This function sets the timing register for the selected integration time. ambient15_set_gain
This function sets the gain level. ambient15_measure_light_level
This function reads the raw ADC data from two channels and then measures the light level in lux based on those readings. This example demonstrates the use of Ambient 15 click board by measuring the ambient light level in Lux.
The demo application is composed of two sections :
Initializes the driver and performs the click default configuration.
Waits for the data ready interrupt, then reads the ambient light level in Lux
and displays the results on the USB UART. By default, the data ready interrupt triggers upon every ADC cycle which will be performed every 200ms.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.