capsense2
2.0.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the CapSense 2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for CapSense 2 Click driver.
capsense2_cfg_setup
Config Object Initialization function. capsense2_init
Initialization function. capsense2_default_cfg
Click Default Configuration function. capsense2_read_register
This function reads a data byte from the selected register by using I2C serial interface. capsense2_get_alert_pin
This function returns the alert pin logic state. capsense2_clear_interrupt
This function clears the INT bit of the main status register if the interrupt pin is asserted. This example demonstrates the use of CapSense 2 click board by reading and displaying the sensor's events.
The demo application is composed of two sections :
Initializes the driver and performs the click default configuration
which resets the click board and links the desired LEDs to buttons and swipe sensors.
Waits for an event interrupt and displays the event on the USB UART.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.