Go to the documentation of this file.
35 #include "drv_digital_out.h"
36 #include "drv_digital_in.h"
37 #include "drv_i2c_master.h"
59 #define MAGNETO11_REG_DATA_LSB 0x00
60 #define MAGNETO11_REG_DATA_MSB 0x01
61 #define MAGNETO11_REG_CONFIG 0x02
62 #define MAGNETO11_REG_OFFSET_LSB 0x03
63 #define MAGNETO11_REG_OFFSET_MSB 0x04
64 #define MAGNETO11_REG_SENSITIVITY 0x0B
82 #define MAGNETO11_DATA_RESOLUTION 0x03FF
83 #define MAGNETO11_DATA_OCF_MASK 0x0800
84 #define MAGNETO11_DATA_PARITY_MASK 0x0400
90 #define MAGNETO11_SENSITIVITY_RES_50mT 0x00
91 #define MAGNETO11_SENSITIVITY_RES_25mT 0x01
92 #define MAGNETO11_SENSITIVITY_RES_12p5mT 0x02
93 #define MAGNETO11_SENSITIVITY_RES_18p75mT 0x03
94 #define MAGNETO11_SENSITIVITY_RES_MASK 0x03
95 #define MAGNETO11_SENSITIVITY_LSB_50mT 0.09766
96 #define MAGNETO11_SENSITIVITY_LSB_25mT 0.04883
97 #define MAGNETO11_SENSITIVITY_LSB_12p5mT 0.02441
98 #define MAGNETO11_SENSITIVITY_LSB_18p75mT 0.03662
104 #define MAGNETO11_CONFIG_SPEED_FAST 0x00
105 #define MAGNETO11_CONFIG_SPEED_SLOW 0x04
106 #define MAGNETO11_CONFIG_POLARITY_NORMAL 0x00
107 #define MAGNETO11_CONFIG_POLARITY_REVERSED 0x02
108 #define MAGNETO11_CONFIG_OP_NORMAL 0x00
109 #define MAGNETO11_CONFIG_OP_POWER_DOWN 0x01
116 #define MAGNETO11_DEV_ADDR_GND 0x56
117 #define MAGNETO11_DEV_ADDR_VCC 0x57
135 #define MAGNETO11_MAP_MIKROBUS( cfg, mikrobus ) \
136 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
137 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA );
321 #endif // MAGNETO11_H
pin_name_t scl
Definition: magneto11.h:162
uint32_t i2c_speed
Definition: magneto11.h:165
err_t magneto11_default_cfg(magneto11_t *ctx)
Magneto 11 default configuration function.
@ MAGNETO11_OK
Definition: magneto11.h:176
magneto11_return_value_t
Magneto 11 Click return value data.
Definition: magneto11.h:175
err_t magneto11_set_config(magneto11_t *ctx, uint8_t config)
Magneto 11 set config function.
err_t magneto11_generic_write(magneto11_t *ctx, uint8_t reg, uint8_t *tx_buf, uint8_t tx_len)
Magneto 11 I2C writing function.
pin_name_t sda
Definition: magneto11.h:163
Magneto 11 Click context object.
Definition: magneto11.h:147
i2c_master_t i2c
Definition: magneto11.h:149
err_t magneto11_generic_read(magneto11_t *ctx, uint8_t reg, uint8_t *rx_buf, uint8_t rx_len)
Magneto 11 I2C reading function.
uint8_t i2c_address
Definition: magneto11.h:166
err_t magneto11_get_magnetic_field(magneto11_t *ctx, float *mag_field)
Magneto 11 get magnetic field function.
Magneto 11 Click configuration object.
Definition: magneto11.h:161
err_t magneto11_get_offset(magneto11_t *ctx, uint16_t *offset)
Magneto 11 get offset function.
uint8_t slave_address
Definition: magneto11.h:152
err_t magneto11_set_sensitivity(magneto11_t *ctx, uint8_t sensitivity)
Magneto 11 set sensitivity function.
@ MAGNETO11_ERROR
Definition: magneto11.h:177
void magneto11_cfg_setup(magneto11_cfg_t *cfg)
Magneto 11 configuration object setup function.
err_t magneto11_init(magneto11_t *ctx, magneto11_cfg_t *cfg)
Magneto 11 initialization function.