35#include "drv_digital_out.h"
36#include "drv_digital_in.h"
37#include "drv_one_wire.h"
59#define THERMO2_CMD_CONVERT_TEMPERATURE 0x44
60#define THERMO2_CMD_WRITE_SCRATCHPAD 0x4E
61#define THERMO2_CMD_READ_SCRATCHPAD 0xBE
62#define THERMO2_CMD_COPY_SCRATCHPAD 0x48
63#define THERMO2_CMD_RECALL_SCRATCHPAD 0xB8
64#define THERMO2_CMD_READ_POWER_SUPPLY 0xB4
82#define THERMO2_CONFIG_ADDRESS_0 0x00
83#define THERMO2_CONFIG_ADDRESS_1 0x01
84#define THERMO2_CONFIG_ADDRESS_2 0x02
85#define THERMO2_CONFIG_ADDRESS_3 0x03
86#define THERMO2_CONFIG_ADDRESS_4 0x04
87#define THERMO2_CONFIG_ADDRESS_5 0x05
88#define THERMO2_CONFIG_ADDRESS_6 0x06
89#define THERMO2_CONFIG_ADDRESS_7 0x07
90#define THERMO2_CONFIG_ADDRESS_8 0x08
91#define THERMO2_CONFIG_ADDRESS_9 0x09
92#define THERMO2_CONFIG_ADDRESS_10 0x0A
93#define THERMO2_CONFIG_ADDRESS_11 0x0B
94#define THERMO2_CONFIG_ADDRESS_12 0x0C
95#define THERMO2_CONFIG_ADDRESS_13 0x0D
96#define THERMO2_CONFIG_ADDRESS_14 0x0E
97#define THERMO2_CONFIG_ADDRESS_15 0x0F
98#define THERMO2_CONFIG_ADDRESS_ALL 0x10
99#define THERMO2_CONFIG_ADDRESS_BIT_MASK 0x1F
100#define THERMO2_CONFIG_RESOLUTION_9BIT 0x00
101#define THERMO2_CONFIG_RESOLUTION_10BIT 0x20
102#define THERMO2_CONFIG_RESOLUTION_11BIT 0x40
103#define THERMO2_CONFIG_RESOLUTION_12BIT 0x60
104#define THERMO2_CONFIG_RESOLUTION_BIT_MASK 0x60
105#define THERMO2_CONFIG_RESERVED_BITS 0x10
111#define THERMO2_DATA_RESOLUTION 0.0625
117#define THERMO2_FAMILY_CODE 0x3B
123#define THERMO2_DEFAULT_ADDRESS THERMO2_CONFIG_ADDRESS_ALL
124#define THERMO2_DEFAULT_RESOLUTION THERMO2_CONFIG_RESOLUTION_12BIT
125#define THERMO2_DEFAULT_TEMP_HIGH_ALARM 0xFF
126#define THERMO2_DEFAULT_TEMP_LOW_ALARM 0x00
144#define THERMO2_MAP_MIKROBUS( cfg, mikrobus ) \
145 cfg.gp0 = MIKROBUS( mikrobus, MIKROBUS_PWM ); \
146 cfg.gp1 = MIKROBUS( mikrobus, MIKROBUS_AN );
err_t thermo2_init(thermo2_t *ctx, thermo2_cfg_t *cfg)
Thermo 2 initialization function.
err_t thermo2_write_scratchpad(thermo2_t *ctx, uint8_t temp_high, uint8_t temp_low, uint8_t config)
Thermo 2 write scratchpad function.
err_t thermo2_read_scratchpad(thermo2_t *ctx, uint8_t *scratchpad)
Thermo 2 read scratchpad function.
void thermo2_gpio_selection(thermo2_cfg_t *cfg, thermo2_gpio_sel_t gpio_sel)
Thermo 2 driver interface setup function.
err_t thermo2_read_temperature(thermo2_t *ctx, float *temperature)
Thermo 2 read temperature function.
err_t thermo2_start_measurement(thermo2_t *ctx)
Thermo 2 start measurement function.
err_t thermo2_check_communication(thermo2_t *ctx)
Thermo 2 check communication function.
err_t thermo2_default_cfg(thermo2_t *ctx)
Thermo 2 default configuration function.
err_t thermo2_select_device(thermo2_t *ctx)
Thermo 2 select device function.
void thermo2_cfg_setup(thermo2_cfg_t *cfg)
Thermo 2 configuration object setup function.
Thermo 2 Click configuration object.
Definition: thermo2.h:181
thermo2_gpio_sel_t gpio_sel
Definition: thermo2.h:186
pin_name_t gp0
Definition: thermo2.h:183
pin_name_t gp1
Definition: thermo2.h:184
Thermo 2 Click context object.
Definition: thermo2.h:167
one_wire_rom_address_t rom_addr
Definition: thermo2.h:171
uint8_t config
Definition: thermo2.h:172
one_wire_t ow
Definition: thermo2.h:169
thermo2_gpio_sel_t
Thermo 2 Click gpio selector.
Definition: thermo2.h:156
@ THERMO2_GPIO_0
Definition: thermo2.h:157
@ THERMO2_GPIO_1
Definition: thermo2.h:158
thermo2_return_value_t
Thermo 2 Click return value data.
Definition: thermo2.h:195
@ THERMO2_OK
Definition: thermo2.h:196
@ THERMO2_ERROR
Definition: thermo2.h:197