battmon4
2.0.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the BATT-MON 4 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for BATT-MON 4 Click driver.
battmon4_cfg_setup
Config Object Initialization function. battmon4_init
Initialization function. battmon4_get_die_temperature
This function reads the chip DIE temperature in Celsius. battmon4_get_batt_in_voltage
This function reads the voltage from BATT IN when Ipeak is ON and OFF. battmon4_get_batt_out_voltage
This function reads the voltage from BATT OUT when Ipeak is ON and OFF. This example demonstrates the use of BATT-MON 4 click board by reading the battery voltage and the chip internal temperature.
The demo application is composed of two sections :
Initializes the driver and logger.
Reads the chip DIE temperature and voltage from BATT IN and BATT OUT and displays the results on the USB UART approximately once per second.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.