rtc16
2.0.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the RTC 16 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for RTC 16 Click driver.
rtc16_cfg_setup
Config Object Initialization function. rtc16_init
Initialization function. rtc16_default_cfg
Click Default Configuration function. rtc16_set_time
This function sets the starting time values - second, minute and hour. rtc16_read_time
This function reads the current time values - second, minute and hour. rtc16_read_date
This function reads the current date values - day of week, day, month and year. This example demonstrates the use of RTC 16 click board by reading and displaying the time and date values.
The demo application is composed of two sections :
Initializes the driver and logger and performs the click default configuration which sets 24h time mode and interrupt to be synchronized with second count-up.
And after that setting the starting time and date.
Waits for the second count-up interrupt and then reads and displays the current time and date values on the USB UART.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.