fram5
2.0.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the FRAM 5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for FRAM 5 Click driver.
fram5_cfg_setup
Config Object Initialization function. fram5_init
Initialization function. fram5_check_communication
This function checks the communication by reading and verifying the device ID. fram5_memory_write
This function writes a desired number of data bytes starting from the selected memory address. fram5_memory_read
This function reads a desired number of data bytes starting from the selected memory address. This example demonstrates the use of FRAM 5 click board by writing specified data to the memory and reading it back.
The demo application is composed of two sections :
Initializes the driver and checks the communication with the click board.
Writes a desired number of bytes to the memory and then verifies that it's written correctly
by reading from the same memory location and displaying the memory content on the USB UART.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.