gsmgnss2
2.0.0.0
|
GSM/GNSS 2 click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click carries SIM868 quad-band GSM/GPRS module.
We provide a library for the GSM/GNSS 2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for GSM/GNSS 2 Click driver.
gsmgnss2_cfg_setup
Config Object Initialization function. gsmgnss2_init
Initialization function. gsmgnss2_module_power
Power ON/OFF the module. gsmgnss2_send_cmd
Send command function. gsmgnss2_set_sim_apn
Set sim card APN. gsmgnss2_send_sms_pdu
GSM GNSS send SMS in PDU mode. This example reads and processes data from GSM/GNSS 2 clicks.
The demo application is composed of two sections :
Initializes the driver and powers up the module, then sets default configuration for connecting the device to network.
Waits for the device to connect to network, then waits for the GNSS position fix. Once it get a fix,
it sends an SMS with GNSS info to the selected phone number approximately every 40 seconds.
A passive GPS antenna is required for the GNSS to receive the position fix. It may take several minutes for the module to receive the fix. In order for the example to work, user needs to set the phone number to which he wants to send an SMS, and also will need to set an APN and SMSC (required for PDU mode only) of entered SIM card. Enter valid data for the following macros: SIM_APN, SIM_SMSC and PHONE_NUMBER_TO_MESSAGE.
Example:
- SIM_APN "vipmobile"
- SIM_SMSC "+381610401"
- PHONE_NUMBER_TO_MESSAGE "+381659999999"
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.