xbee2
2.1.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the XBEE 2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for XBEE 2 Click driver.
xbee2_cfg_setup
Config Object Initialization function. xbee2_init
Initialization function. xbee2_get_serial_number
This function sends a get serial number command. xbee2_set_device_name
This function sets the device name (node identifier). xbee2_set_destination_address
This function sets the destination address high and low bytes. This example demonstrates the use of an XBEE 2 click board by showing the communication between the two click boards configured in transparent mode.
The demo application is composed of two sections :
Initializes the driver and configures the click board by performing a factory reset, and setting the device name, destination address, api mode to transparent,
and a device role to join or form network depending on the application mode.
Depending on the selected application mode, it reads all the received data or sends the desired message every 3 seconds.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.