proximity18
2.1.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the Proximity 18 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for Proximity 18 Click driver.
proximity18_cfg_setup
Config Object Initialization function. proximity18_init
Initialization function. proximity18_default_cfg
Click Default Configuration function. proximity18_start_measurement
This function starts the measurement by setting the one time trigger bit in the PS_CONF3_MS register. proximity18_wait_for_data_ready
This function waits for the MPX data ready interrupt flag. proximity18_read_proximity
This function reads the proximity data from all 3 sensors. This example demonstrates the use of Proximity 18 click board by reading and displaying the proximity data on the USB UART.
The demo application is composed of two sections :
Initializes the driver and logger, and performs the click default configuration.
Reads the proximity data from 3 sensors in a multiplex mode and displays it on the USB UART
approximately once per second. The higher the proximity value, the closer the detected object is.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.