buck22
2.1.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the Buck 22 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for Buck 22 Click driver.
buck22_cfg_setup
Config Object Initialization function. buck22_init
Initialization function. buck22_set_vout
This function sets the output voltage by using I2C serial interface. buck22_read_vout
This function reads the output voltage by using I2C serial interface. buck22_get_pg_pin
This function returns the power good (PG) pin logic state. This example demonstrates the use of Buck 22 click by changing the output voltage.
The demo application is composed of two sections :
Initializes the driver and sets the control settings.
Changes the output voltage every 3 seconds and displays on the USB UART the currently set voltage output value. It also checks the power good pin indicator.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.