rs485isolator3
2.1.0.0
|
RS485 Isolator 3 Click is a compact add-on board that provides electrical isolation and signal conditioning for RS485 communication systems. This board features the ADM2763E, a 500kbps, 5.7kV RMS, signal-isolated RS-485 transceiver from Analog Devices.
We provide a library for the RS485 Isolator 3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for RS485 Isolator 3 Click driver.
rs485isolator3_cfg_setup
Config Object Initialization function. rs485isolator3_init
Initialization function. rs485isolator3_default_cfg
Click Default Configuration function. rs485isolator3_enable_receiver_input
RS485 Isolator 3 enable receiver input function. rs485isolator3_disable_receiver_input
RS485 Isolator 3 disable receiver input function. rs485isolator3_disable_output
RS485 Isolator 3 disable output function. This example reads and processes data from RS485 Isolator 3 clicks.
The demo application is composed of two sections :
Initializes the driver and enables the selected mode.
Depending on the selected mode, it reads all the received data or sends the desired message
every 2 seconds.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.