rs4857
2.1.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the RS485 7 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for RS485 7 Click driver.
rs4857_cfg_setup
Config Object Initialization function. rs4857_init
Initialization function. rs4857_receiver_enable
RS485 7 enables the receiver function. rs4857_driver_enable
RS485 7 enables the driver function. This example reads and processes data from RS485 7 clicks. The library also includes a function for enabling/disabling the receiver or driver and data writing or reading.
The demo application is composed of two sections :
Initializes driver performs wake-up module and enables the selected mode.
This example demonstrates the use of the RS485 7 Click boardâ„¢. The app sends a "MikroE" message, reads the received data and parses it. Results are being sent to the UART Terminal, where you can track their changes.
Operation Mode: Full duplex. Transmitter: Y and Z. Receiver: A and B. Wire connection: Y-A, Z-B.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.