irda4 2.1.0.0
|
IrDA 4 Click is a compact add-on board that provides a cost-effective solution for sending and receiving IR serial data. This board features the TFBS4650, an infrared transceiver from Vishay Semiconductors. The transceiver includes a PIN photodiode, an infrared emitter, and a low-power integral circuit and complies with the IrDA physical layer specification.
We provide a library for the IrDA 4 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for IrDA 4 Click driver.
irda4_cfg_setup
Config Object Initialization function. irda4_init
Initialization function. irda4_generic_write
IrDA 4 data writing function. irda4_generic_read
IrDA 4 data reading function. irda_hw_reset
IrDA 4 hardware reset function. This example demonstrates the use of IrDA 4 click board by processing
the incoming data and displaying them on the USB UART.
The demo application is composed of two sections :
Initializes the driver and disables the transmitter shutdown.
Demonstrates the use of IrDA 4 clicks which can be used as transmitter or receiver.
- TRANSMITTER : Device is sending tx_message data.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.