Go to the documentation of this file.
35 #include "mikrosdk_version.h"
38 #if mikroSDK_GET_VERSION < 20800ul
39 #include "rcu_delays.h"
45 #include "drv_digital_out.h"
46 #include "drv_digital_in.h"
47 #include "drv_spi_master.h"
70 #define MAGNETO14_REG_ZERO_0 0x00
71 #define MAGNETO14_REG_ZERO_1 0x01
72 #define MAGNETO14_REG_BCT 0x02
73 #define MAGNETO14_REG_ET_YX 0x03
74 #define MAGNETO14_REG_PPT_ILIP 0x04
75 #define MAGNETO14_REG_PPT 0x05
76 #define MAGNETO14_REG_MG_LT_HT_MG 0x06
77 #define MAGNETO14_REG_RD 0x09
78 #define MAGNETO14_REG_FW 0x0E
79 #define MAGNETO14_REG_HYS 0x10
80 #define MAGNETO14_REG_M_GH_GL 0x1B
93 #define MAGNETO14_CMD_READ_ANGLE 0x00
94 #define MAGNETO14_CMD_READ_REGISTER 0x02
95 #define MAGNETO14_CMD_WRITE_REGISTER 0x04
96 #define MAGNETO14_CMD_RESTORE_ALL_NVM 0x05
97 #define MAGNETO14_CMD_STORE_ALL_NVM 0x06
98 #define MAGNETO14_CMD_STORE_SINGLE_NVM 0x07
116 #define MAGNETO14_CMD_BIT_MASK 0x07
117 #define MAGNETO14_REG_BIT_MASK 0x1F
123 #define MAGNETO14_TRIMMING_X_DIS 0x00
124 #define MAGNETO14_TRIMMING_X_EN 0x01
125 #define MAGNETO14_TRIMMING_Y_DIS 0x00
126 #define MAGNETO14_TRIMMING_Y_EN 0x02
132 #define MAGNETO14_MG_LT_LVL_0 0x00
133 #define MAGNETO14_MG_LT_LVL_1 0x20
134 #define MAGNETO14_MG_LT_LVL_2 0x40
135 #define MAGNETO14_MG_LT_LVL_3 0x60
136 #define MAGNETO14_MG_LT_LVL_4 0x80
137 #define MAGNETO14_MG_LT_LVL_5 0xA0
138 #define MAGNETO14_MG_LT_LVL_6 0xC0
139 #define MAGNETO14_MG_LT_LVL_7 0xE0
140 #define MAGNETO14_MG_HT_LVL_0 0x00
141 #define MAGNETO14_MG_HT_LVL_1 0x04
142 #define MAGNETO14_MG_HT_LVL_2 0x08
143 #define MAGNETO14_MG_HT_LVL_3 0x0C
144 #define MAGNETO14_MG_HT_LVL_4 0x10
145 #define MAGNETO14_MG_HT_LVL_5 0x14
146 #define MAGNETO14_MG_HT_LVL_6 0x18
147 #define MAGNETO14_MG_HT_LVL_7 0x1C
148 #define MAGNETO14_MG_BIT_MASK 0xFC
154 #define MAGNETO14_MGH_ST_OK 0x00
155 #define MAGNETO14_FLD_ST_OK 0x00
156 #define MAGNETO14_FLD_ST_MGL 0x01
157 #define MAGNETO14_FLD_ST_MGH 0x02
158 #define MAGNETO14_FLD_ST_BIT_MASK 0x03
168 #define MAGNETO14_SET_DATA_SAMPLE_EDGE SET_SPI_DATA_SAMPLE_EDGE
169 #define MAGNETO14_SET_DATA_SAMPLE_MIDDLE SET_SPI_DATA_SAMPLE_MIDDLE
187 #define MAGNETO14_MAP_MIKROBUS( cfg, mikrobus ) \
188 cfg.miso = MIKROBUS( mikrobus, MIKROBUS_MISO ); \
189 cfg.mosi = MIKROBUS( mikrobus, MIKROBUS_MOSI ); \
190 cfg.sck = MIKROBUS( mikrobus, MIKROBUS_SCK ); \
191 cfg.cs = MIKROBUS( mikrobus, MIKROBUS_CS ); \
192 cfg.pwm = MIKROBUS( mikrobus, MIKROBUS_PWM ); \
193 cfg.mgh = MIKROBUS( mikrobus, MIKROBUS_INT )
423 #endif // MAGNETO14_H
spi_master_mode_t spi_mode
Definition: magneto14.h:235
magneto14_return_value_t
Magneto 14 Click return value data.
Definition: magneto14.h:245
@ MAGNETO14_ERROR
Definition: magneto14.h:247
pin_name_t chip_select
Definition: magneto14.h:213
pin_name_t cs
Definition: magneto14.h:227
err_t magneto14_write_reg(magneto14_t *ctx, uint8_t cmd, uint8_t reg, uint8_t data_in)
Magneto 14 data writing function.
This file contains SPI specific macros, functions, etc.
Magneto 14 Click context object.
Definition: magneto14.h:203
void magneto14_cfg_setup(magneto14_cfg_t *cfg)
Magneto 14 configuration object setup function.
err_t magneto14_read_reg(magneto14_t *ctx, uint8_t cmd, uint8_t reg, uint8_t *data_out)
Magneto 14 data reading function.
pin_name_t mgh
Definition: magneto14.h:231
pin_name_t sck
Definition: magneto14.h:226
@ MAGNETO14_OK
Definition: magneto14.h:246
err_t magneto14_get_angle(magneto14_t *ctx, float *angle)
Magneto 14 gets the angular position function.
err_t magneto14_init(magneto14_t *ctx, magneto14_cfg_t *cfg)
Magneto 14 initialization function.
err_t magneto14_get_angle_raw_data(magneto14_t *ctx, uint16_t *raw_data)
Magneto 14 gets the angle raw data function.
pin_name_t mosi
Definition: magneto14.h:225
void magneto14_set_pwm_pin(magneto14_t *ctx, uint8_t pwm_state)
Magneto 14 set PWM pin function.
spi_master_chip_select_polarity_t cs_polarity
Definition: magneto14.h:236
err_t magneto14_default_cfg(magneto14_t *ctx)
Magneto 14 default configuration function.
uint8_t magneto14_get_mgh(magneto14_t *ctx)
Magneto 14 gets the MGH function.
Magneto 14 Click configuration object.
Definition: magneto14.h:222
digital_in_t mgh
Definition: magneto14.h:208
pin_name_t miso
Definition: magneto14.h:224
err_t magneto14_set_mag_field_thd(magneto14_t *ctx, uint8_t mglt, uint8_t mght)
Magneto 14 sets the magnetic field threshold function.
uint32_t spi_speed
Definition: magneto14.h:234
digital_out_t pwm
Definition: magneto14.h:205
pin_name_t pwm
Definition: magneto14.h:230
spi_master_t spi
Definition: magneto14.h:211
err_t magneto14_get_field_strength(magneto14_t *ctx, uint8_t *field_strength)
Magneto 14 gets the magnetic field strength function.