microwave5
2.1.0.0
|
PRVIH_PAR_RECENICA_SA_PRODUCT_PAGE_DA_ISPRATE_CELINU
[click Product page](CLICK_PRODUCT_PAGE_LINK)
We provide a library for the Microwave 5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for Microwave 5 Click driver.
microwave5_cfg_setup
Config Object Initialization function. microwave5_init
Initialization function. microwave5_read_raw_adc
Microwave 5 read raw ADC value function. microwave5_read_voltage
Microwave 5 read voltage level function. microwave5_set_vref
Microwave 5 set vref function. This example demonstrates the use of the Microwave 5 Click boardâ„¢ by reading and displaying the results of AD conversion and motion detection.
The demo application is composed of two sections :
The initialization of I2C or ADC module and log UART. After driver initialization, the app calculates the reference ADC value.
The demo application reads the ADC results, takes an ADC sample, compares the difference between the taken samples and the ADC reference value, and reports the movement if the difference is higher/lower than the selected threshold value. Results are being sent to the UART Terminal, where you can track their changes.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.