dac15
2.1.0.0
|
API for configuring and manipulating DAC 15 Click driver. More...
Modules | |
DAC 15 Registers List | |
List of registers of DAC 15 Click driver. | |
DAC 15 Registers Settings | |
Settings for registers of DAC 15 Click driver. | |
DAC 15 MikroBUS Map | |
MikroBUS pin mapping of DAC 15 Click driver. | |
Functions | |
void | dac15_cfg_setup (dac15_cfg_t *cfg) |
DAC 15 configuration object setup function. More... | |
void | dac15_drv_interface_selection (dac15_cfg_t *cfg, dac15_drv_t drv_sel) |
DAC 15 driver interface setup function. More... | |
err_t | dac15_init (dac15_t *ctx, dac15_cfg_t *cfg) |
DAC 15 initialization function. More... | |
err_t | dac15_default_cfg (dac15_t *ctx) |
DAC 15 default configuration function. More... | |
err_t | dac15_generic_write (dac15_t *ctx, uint8_t reg, uint8_t *data_in, uint8_t len) |
DAC 15 data writing function. More... | |
err_t | dac15_generic_read (dac15_t *ctx, uint8_t reg, uint8_t *data_out, uint8_t len) |
DAC 15 data reading function. More... | |
err_t | dac15_write_reg (dac15_t *ctx, uint8_t reg, uint16_t data_in) |
DAC 15 write register function. More... | |
err_t | dac15_read_reg (dac15_t *ctx, uint8_t reg, uint16_t *data_out) |
DAC 15 read register function. More... | |
void | dac15_power_up_to_zero_scale (dac15_t *ctx) |
DAC 15 DACs power up to zero scale function. More... | |
void | dac15_power_up_to_midscale (dac15_t *ctx) |
DAC 15 DACs s power up to midscale function. More... | |
err_t | dac15_get_device_id (dac15_t *ctx, uint16_t *device_id) |
DAC 15 get device ID function. More... | |
err_t | dac15_set_sync_mode (dac15_t *ctx) |
DAC 15 set sync mode function. More... | |
err_t | dac15_soft_reset (dac15_t *ctx) |
DAC 15 soft reset function. More... | |
err_t | dac15_set_dac_data (dac15_t *ctx, uint8_t dac_sel, uint16_t dac_data) |
DAC 15 set DAC data function. More... | |
err_t | dac15_get_dac_data (dac15_t *ctx, uint8_t dac_sel, uint16_t *dac_data) |
DAC 15 get DAC data function. More... | |
err_t | dac15_set_dac_vout (dac15_t *ctx, uint8_t dac_sel, float vtg) |
DAC 15 set DAC output voltage function. More... | |
err_t | dac15_get_dac_vout (dac15_t *ctx, uint8_t dac_sel, float *vtg) |
DAC 15 get DAC output voltage function. More... | |
API for configuring and manipulating DAC 15 Click driver.
void dac15_cfg_setup | ( | dac15_cfg_t * | cfg | ) |
DAC 15 configuration object setup function.
This function initializes click configuration structure to initial values.
[out] | cfg | : Click configuration structure. See dac15_cfg_t object definition for detailed explanation. |
err_t dac15_default_cfg | ( | dac15_t * | ctx | ) |
DAC 15 default configuration function.
This function executes a default configuration of DAC 15 click board.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. void dac15_drv_interface_selection | ( | dac15_cfg_t * | cfg, |
dac15_drv_t | drv_sel | ||
) |
DAC 15 driver interface setup function.
This function sets a serial driver interface which will be used further in the click driver.
[out] | cfg | : Click configuration structure. See dac15_cfg_t object definition for detailed explanation. |
[in] | drv_sel | : Driver interface selection. See dac15_drv_t object definition for detailed explanation. |
err_t dac15_generic_read | ( | dac15_t * | ctx, |
uint8_t | reg, | ||
uint8_t * | data_out, | ||
uint8_t | len | ||
) |
DAC 15 data reading function.
This function reads a desired number of data bytes starting from the selected register.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | reg | : Start register address. |
[out] | data_out | : Output read data. |
[in] | len | : Number of bytes to be read. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_generic_write | ( | dac15_t * | ctx, |
uint8_t | reg, | ||
uint8_t * | data_in, | ||
uint8_t | len | ||
) |
DAC 15 data writing function.
This function writes a desired number of data bytes starting from the selected register.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | reg | : Start register address. |
[in] | data_in | : Data to be written. |
[in] | len | : Number of bytes to be written. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_get_dac_data | ( | dac15_t * | ctx, |
uint8_t | dac_sel, | ||
uint16_t * | dac_data | ||
) |
DAC 15 get DAC data function.
This function read the raw DAC data for the selected DAC channel of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | dac_sel | : DAC Vout channel:
|
[out] | dac_data | : DAC raw data, 16-bit. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_get_dac_vout | ( | dac15_t * | ctx, |
uint8_t | dac_sel, | ||
float * | vtg | ||
) |
DAC 15 get DAC output voltage function.
This function reads the DAC output voltage for the selected DAC channel of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | dac_sel | : DAC Vout channel:
|
[out] | vtg | : DAC output voltage [V]. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_get_device_id | ( | dac15_t * | ctx, |
uint16_t * | device_id | ||
) |
DAC 15 get device ID function.
This function reads device ID data of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[out] | device_id | : Device ID. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_init | ( | dac15_t * | ctx, |
dac15_cfg_t * | cfg | ||
) |
DAC 15 initialization function.
This function initializes all necessary pins and peripherals used for this click board.
[out] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | cfg | : Click configuration structure. See dac15_cfg_t object definition for detailed explanation. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. void dac15_power_up_to_midscale | ( | dac15_t * | ctx | ) |
DAC 15 DACs s power up to midscale function.
This function sets DACs s power up to midscale of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
void dac15_power_up_to_zero_scale | ( | dac15_t * | ctx | ) |
DAC 15 DACs power up to zero scale function.
This function sets DACs power up to zero scale of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
err_t dac15_read_reg | ( | dac15_t * | ctx, |
uint8_t | reg, | ||
uint16_t * | data_out | ||
) |
DAC 15 read register function.
This function reads data word from the selected register of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | reg | : Register address. |
[out] | data_out | : Output read data. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_set_dac_data | ( | dac15_t * | ctx, |
uint8_t | dac_sel, | ||
uint16_t | dac_data | ||
) |
DAC 15 set DAC data function.
This function sets the raw DAC data for the selected DAC channel of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | dac_sel | : DAC Vout channel:
|
[in] | dac_data | : DAC raw data, 16-bit. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_set_dac_vout | ( | dac15_t * | ctx, |
uint8_t | dac_sel, | ||
float | vtg | ||
) |
DAC 15 set DAC output voltage function.
This function sets the DAC output voltage for the selected DAC channel of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | dac_sel | : DAC Vout channel:
|
[in] | vtg | : DAC output voltage [0V-3.3V]. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_set_sync_mode | ( | dac15_t * | ctx | ) |
DAC 15 set sync mode function.
This function set sync mode to synchronously load those DACs of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_soft_reset | ( | dac15_t * | ctx | ) |
DAC 15 soft reset function.
This function resets the device to its default state of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation. err_t dac15_write_reg | ( | dac15_t * | ctx, |
uint8_t | reg, | ||
uint16_t | data_in | ||
) |
DAC 15 write register function.
This function writes a desired data word to the selected register of the DAC80502, Dual, 16-Bit, 14-Bit, and 12-Bit, 1-LSB INL, Voltage-Output DACs With Precision Internal Reference on the USB-C Sink 3 Click board™.
[in] | ctx | : Click context object. See dac15_t object definition for detailed explanation. |
[in] | reg | : Register address. |
[in] | data_in | : Data to be written. |
0
- Success, -1
- Error. See #err_t definition for detailed explanation.