anynet3gaa
2.0.0.0
|
AnyNet 3G-AA click is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analyzing and processing. AnyNet click boardâ„¢ provides a secure connection with the AWS over the air (OTA), by utilizing the Quectel UG95-AA 3G module, offering UMTS/HSPA coverage for the North American region, Eseye ES4623 embedded SIM card, that can work with all the major cellular operators within the NA region. The AnyNet 3G click can be used as an AWS IoT button with almost no configuration.
We provide a library for the ANYNET3GAA Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for ANYNET3GAA Click driver.
anynet3gaa_cfg_setup
Config Object Initialization function. anynet3gaa_init
Initialization function. anynet3gaa_send_cmd
This function sends a specified command to the click module. anynet3gaa_send_cmd_with_par
This function sends a command with specified parameter to the click module. anynet3gaa_send_cmd_check
This function checks the command status. This example demonstrates the use of AnyNet 3G-AA click board.
The demo application is composed of two sections :
Initializes the driver and sends a few AT commands to test the communication and configure the click board.
Reads all the received data and logs them to the USB UART.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.