ipd2015
2.1.0.0
|
IPD Click is a compact add-on board for controlling inductive and resistive loads in industrial automation and other demanding applications. This board features the TPD2015FN, an 8-channel high-side switch with MOSFET outputs from Toshiba Semiconductor.
We provide a library for the IPD 2015 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for IPD 2015 Click driver.
ipd2015_cfg_setup
Config Object Initialization function. ipd2015_init
Initialization function. ipd2015_all_pins_set
IPD 2015 pin setting function. ipd2015_set_out_level
IPD 2015 set output level function. ipd2015_get_out_state
IPD 2015 get output level function. This example demonstrates the use of IPD 2015 click board by toggling the output state.
The demo application is composed of two sections :
Initializes the driver and logger.
Switches on all output pins state for 2 seconds, then switches them off, and turns them on one by one.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.