easypull
2.1.0.0
|
EasyPull Click is a compact add-on board designed to easily configure mikroBUS™ signals into pull-up or pull-down states, perfect for various applications. It features a universal setup with 4.7kΩ resistors to ensure stable performance across vital communication lines such as SPI, UART, I2C, and standard mikroBUS™ signals (AN, RST, PWM, INT).
We provide a library for the EasyPull Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for EasyPull Click driver.
easypull_cfg_setup
Config Object Initialization function. easypull_init
Initialization function. easypull_get_an_pin
This function reads the state of the AN pin of EasyPull Click board. easypull_get_rst_pin
This function reads the state of the RST pin of EasyPull Click board. easypull_get_cs_pin
This function reads the state of the CS pin of EasyPull Click board. This example demonstrates the use of EasyPull Click boards.
The demo application is composed of two sections :
Initializes the driver and USB UART logger.
It checks the state of the pins and displays their state on the USB UART.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.