Click Boards
MENU
MENU
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MikroElektronika Team
Version: 1.0.0.1
Last Updated: 2019-05-27
Category: Storage
Downloaded: 455 times
Not followed.
License: MIT license
Download [2.96MB]MAC Address click provides a unique node address for your application. It also has 1Kbit of writable EEPROM memory. MAC Address click carries the 24AA025E64 2K I2C Serial EEPROM with EUI-64 node identity. The click is designed to run on either 3.3V or 5V power supply.
[learn more]
Author: MikroElektronika Team
Version: 1.0.0.0
Last Updated: 2019-02-21
Category: Measurement
Downloaded: 59 times
Not followed.
License: MIT license
Download [2.33MB]Pressure 12 click is a barometric gauge pressure measuring Click board, equipped with the Amplified Basic Pressure sensor series (ABP), which features a ratiometric analog output, which is proportional to the applied pressure.
[learn more] Author: MikroElektronika Team
Version: 1.0.0.0
Last Updated: 2019-05-24
Category: Communication
Downloaded: 67 times
Not followed.
License: MIT license
Download [3.12MB]I2C Isolator click carries ISO1540, a low-power, bidirectional isolator compatible with I2C interfaces.
[learn more] Author: MikroElektronika Team
Version: 1.0.0.1
Last Updated: 2019-05-23
Category: Power supply
Downloaded: 1047 times
Followed by: 4 users
License: MIT license
Download [2.77MB]Charger click carries both a battery charger controller and a battery charge monitor. The smaller chip is MCP73831, a single-cell Li-Ion and Li-Polymer charge management controller. The larger IC is DS2438, a smart battery monitor. The monitor communicates with the MCU through a 1-Wire interface. The click is designed to use a 5V power supply.
[learn more] Author: MikroElektronika Team
Version: 1.0.0.0
Last Updated: 2019-05-23
Category: CAN / LIN / RS485
Downloaded: 58 times
Not followed.
License: MIT license
Download [2.42MB]CAN Isolator click provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter. The click is designed to run on either 3.3V or 5V power supply. CAN Isolator click communicates with the target microcontroller over UART interface.
[learn more] Author: MikroElektronika Team
Version: 1.0.0.1
Last Updated: 2019-05-23
Category: Graphics & LCD
Downloaded: 392 times
Not followed.
License: MIT license
Download [1.88MB]7-SEG RGB click carries a full color single 7 segment digit display. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the CS, and PWM pin on the mikroBUS line.
[learn more] Author: MikroElektronika Team
Version: 1.0.0.1
Last Updated: 2019-05-23
Category: Communication
Downloaded: 1610 times
Not followed.
License: MIT license
Download [2.88MB]1-Wire I2C click converts the 1-wire signal from the MCU to I2C signal, which is then sent to the slave, and vice versa.
The click carries DS28E17 1-Wire-to-I2C master bridge from Maxim Integrated. 1-Wire I2C click runs on a 3.3V power supply.
Author: MikroElektronika Team
Version: 1.0.0.0
Last Updated: 2018-12-19
Category: Other Codes
Downloaded: 72 times
Not followed.
License: MIT license
Download [4.07MB]RTC 8 click is a real time clock module which has an extremely low power consumption, allowing it to be used with a single button cell battery, for an extended period of time.
[learn more] 
Author: MikroElektronika Team
Version: 2.8.0.0
Last Updated: 2019-05-22
Category: Bootloaders
Downloaded: 9165 times
Not followed.
License: MIT license
Download [2.70MB]To make it as simple as possible to program MCUs on our dev boards, most of them come with a preloaded USB-HID bootloader.
While the bootloader firmware is specific to each chip, the PC utility for loading your HEX file to the target microcontroller is universal. It’s done in four steps and takes less than 20 seconds.
Author: Konstantin Metodiev
Version: 1.0.0.0
Last Updated: 2019-05-17
Category: Other Codes
Downloaded: 25 times
Not followed.
License: MIT license
Download [667.72KB]This is an exemplary project about interfacing devices ADS1015 ADC and 24C256 E2PROM by ATmega644P on I2C bus. The issue highlighted by the project is developing an object-oriented code in pure C for the aforementioned devices to be addressed. Prior to building, please turn TFT_16bit_Defs and TFT_Defs libraries off in Library Manager.
[learn more] 