We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Stepper
Downloaded: 86 times
Not followed.
License: MIT license
Download [568.48KB]STSPIN820 Click is a stepper motor driver with the PWM current control, selectable microstepping up to 256 microsteps, and a wide voltage range. It is based on the STSPIN820, a stepper motor driver from STSPIN8 series. Designed to be a bullet-proof solution for the new wave of demanding industrial applications, it integrates two full-bridges with low ON resistance, the control logic, and a full set of protection features, in a small 4x4mm QFN package. Its output stage implements the PWM current control with the fixed OFF time. The device can be used with the step motor voltage ranging from 7V up to 45V, and current up to 1.5A per bridge.
[learn more]
Author: Liyanage Kalana
Last Updated: 2019-04-30
Package Version: 1.0.0.0
Category: Internal MCU modules
Downloaded: 669 times
Not followed.
License: MIT license
Download [97.01KB]I built my own PCF8574/PCF8575 PortExpander chip Library for any PIC MCU that have built-in I2C.This library can control each GPIO as input or output separately.
[learn more] Author: Liyanage Kalana
Last Updated: 2019-04-30
Package Version: 1.0.0.0
Category: Graphics & LCD
Downloaded: 270 times
Not followed.
License: MIT license
Download [91.85KB]This Source code can be use to drive 4-Digit Seven Segment Display array with Max7219. My source code have Special features/functions.
-> Right Scroll
-> Left Scroll
-> With small modifications this can be use with RTC
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.16
mikroSDK Library: 2.0.0.0
Category: Buck
Downloaded: 267 times
Not followed.
License: MIT license
Download [521.01KB]MIC24045 Click carries MIC24045 I2C-programmable, high-efficiency, wide input range, 5A synchronous step-down regulator from Microchip.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.20
mikroSDK Library: 2.0.0.0
Category: Motion
Downloaded: 412 times
Not followed.
License: MIT license
Download [561.47KB]Microwave Click detects movement, thanks to the PD-V11 a 24GHz microwave motion sensor. The typical use for Microwave Click is a proximity or motion detector in various applications and devices.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: CAN
Downloaded: 211 times
Not followed.
License: MIT license
Download [1.03MB]MCP2518FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network. This board features the MCP2518FD, an external CAN FD controller with an SPI interface, and a high-speed CAN transceiver, the ATA6563, both from Microchip. The ATA6563, a low-level physical layer IC (PHY), provides a physical connection with the CAN bus itself, while the CAN controller MCP2518FD represents an interface between the MCU and the PHY. It features three operating modes with dedicated fail-safe features, remote wake-up via CAN, and ideally passive behavior when powered off on the CAN bus. This Click board™ is suitable for developing a wide range of automotive diagnostic applications, even on MCUs that do not natively support CAN interface.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.18
mikroSDK Library: 2.0.0.0
Category: Magnetic
Downloaded: 469 times
Not followed.
License: MIT license
Download [449.18KB]Magneto 4 Click is a high-resolution magnetic encoder Click board™ which allows contactless motion sensing down to 0.5µm.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.19
mikroSDK Library: 2.0.0.0
Category: Motion
Downloaded: 385 times
Not followed.
License: MIT license
Download [524.35KB]SmartDOF Click features a highly advanced integrated system-in-package (SiP) solution with three different sensors on-chip: triaxial accelerometer, magnetometer, and triaxial gyroscope are all integrated on the same die, along with the powerful 32-bit ARM® Cortex®-M0+ MCU. Thanks to the integrated MCU, the BN080 SiP provides extensive signal processing.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: Linear
Downloaded: 274 times
Not followed.
License: MIT license
Download [600.34KB] Author: Shawon Shahryiar
Last Updated: 2019-04-22
Package Version: 1.0.0.0
Category: Light control
Downloaded: 447 times
Not followed.
License: MIT license
Download [15.53KB]PICAXE is basically PIC micro with different branding. Here I used a PICAXE micro to drive a flexible Neopixel strip using hardware SPI. SPI is used along with the PIC's 32MHz internal oscillator as Neoppixels employ time-slotting trick to transfer data at a very fast rate with small timings. The code is written with CCS PIC C compiler.
[learn more] 
