TOP Contributors

  1. MIKROE (2784 codes)
  2. Alcides Ramos (405 codes)
  3. Shawon Shahryiar (307 codes)
  4. jm_palomino (133 codes)
  5. Bugz Bensce (97 codes)
  6. S P (73 codes)
  7. dany (71 codes)
  8. MikroBUS.NET Team (35 codes)
  9. NART SCHINACKOW (34 codes)
  10. Armstrong Subero (27 codes)

Most Downloaded

  1. Timer Calculator (141246 times)
  2. FAT32 Library (74083 times)
  3. Network Ethernet Library (58702 times)
  4. USB Device Library (48814 times)
  5. Network WiFi Library (44521 times)
  6. FT800 Library (44072 times)
  7. GSM click (30802 times)
  8. mikroSDK (29647 times)
  9. PID Library (27354 times)
  10. microSD click (27251 times)
Libstock prefers package manager

Package Manager

We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]

< Back
Library

UART_D16950 Library

Rating:

5

Author: MIKROE

Last Updated: 2015-03-10

Package Version: 1.0.0.0

Category: Communication

Downloaded: 1863 times

Followed by: 1 user

License: MIT license  

-The UART_D16950 library simplifies usage of the UART module of FT90x family.

No Abuse Reported

Do you want to subscribe in order to receive notifications regarding "UART_D16950 Library" changes.

Do you want to unsubscribe in order to stop receiving notifications regarding "UART_D16950 Library" changes.

Do you want to report abuse regarding "UART_D16950 Library".

  • Information
  • Comments (0)

Library Blog

-The UART_D16950  library simplifies usage of the UART module of FT90x family.

-Some of module features:
  1)  Software compatible with 450, 550, 750 and 950 UARTs
  2)  Separate configurable BAUD clock line
  3)  Configuration capability
  4)  Two modes of operation: UART mode and FIFO mode
  5)  Majority voting logic
  6)  16 / 128 bytes FIFO for TX and RX in FIFO mode to reduce the interrupt frequency
  7)  Adds or deletes standard asynchronous communication bits to or from the serial data
  8)  Double buffering for both TX and RX in UART mode
  9)  Independently controlled transmit, receive, line status and data set interrupts
  10) Programmable baud generator
  11) Modem control functions (CTS, RTS, DSR, DTR, RI and DCD)
  12) Programmable automatic out-of-band Flow Control logic through Auto-RTS and Auto-CTS
  13) Programmable automatic Flow Control logic using DTR and DSR
  14) Programmable automatic in-band Flow Control logic using XON / XOFF characters
  15) Programmable special characters detection
  16) Trigger levels for TX and RX FIFO interrupts, automatic in-band and out-of-band flow control
  17) RS-485 buffer enable signals
  18) TX and RX disable capability
  19) Fully programmable serial interface characteristics

UART Icon.

UART Icon.

UART Icon.

View full image

ALSO FROM THIS AUTHOR

SPIRIT Click

0

SPIRIT Click carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, RST, CS.

[Learn More]

Compass 5 click

5

Compass 5 Click is a compact add-on board that contains a 3-axis magnetometer device suitable for compass application. This board features the AK09918C, a 3-axis electronic compass with high sensitive Hall sensor technology from AKM Semiconductor.

[Learn More]

PWM driver click

0

If you need to control DC motors with loads up to 10A, PWM driver click is the perfect solution, thanks to the Silicon Lab Si8711CC one-channel isolator. It communicates with the target MCU over PWM pin, and runs on a 5V power supply.

[Learn More]