Click Boards
MENU
MENU
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MikroElektronika Team
Last Updated: 2019-02-26
Category: Measurement
Downloaded: 72 times
Not followed.
Pressure 5 click is a barometric pressure measurement Click board, which features the BMP388, an accurate absolute barometric pressure sensor.
Do you want to subscribe in order to receive notifications regarding "Pressure 5 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Pressure 5 click" changes.
Do you want to report abuse regarding "Pressure 5 click".
Library Description
The library initializes and defines the I2C or SPI bus driver and drivers that offer a choice for writing data in register and reads data form register. The library includes function for read Pressure data in mBar and Temperature data in C. The user also has the function for update all calibration coefficients, function for software reset, read Interrupt state and functions for get Pressure and Temperature raw data.
Key functions:
float pressure5_getTemperatureData() - Temperature data in C.float pressure5_getPressureData() - Pressure data in mBar.void pressure5_updateCoefficient() - Update calibration coefficients.Examples description
The application is composed of the three sections :
void applicationTask()
{
float Temperature;
float Pressure;
char demoText[ 50 ] = {0};
Temperature = pressure5_getTemperatureData();
FloatToStr(Temperature, demoText);
mikrobus_logWrite(" Temperature: ", _LOG_TEXT);
mikrobus_logWrite(demoText, _LOG_TEXT);
mikrobus_logWrite(" C", _LOG_LINE);
Pressure = pressure5_getPressureData();
FloatToStr(Pressure, demoText);
mikrobus_logWrite(" Pressure: ", _LOG_TEXT);
mikrobus_logWrite(demoText, _LOG_TEXT);
mikrobus_logWrite(" mBar ", _LOG_LINE);
mikrobus_logWrite("--------------------------", _LOG_LINE);
Delay_ms( 1500 );
}
Other mikroE Libraries used in the example:
SPIUARTI2CConversionsAdditional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.