We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Other Codes
Downloaded: 229 times
Followed by: 2 users
License: MIT license
Download [197.72KB]This is a C# driver to use the DAC Click board on the Quail board or any NETMF board.
Features :
- Output 0-3.3V (or more with 2x gain)
- Shutdown/Wakeup control
- Buffered/Unbuffered action
- User selectable gain (x1 or x2)
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Other Codes
Downloaded: 235 times
Followed by: 2 users
License: MIT license
Download [218.78KB]This is a C# driver to use the Capsense Click board on the Quail board or any NETMF board.
Features :
- Enable/disable slider
- Individual led control
- Event for button pads
- Event for slider value change
- Send custom commands to board
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Measurement
Downloaded: 239 times
Followed by: 4 users
License: MIT license
Download [221.25KB]This is a C# driver to use the Motion Click board on the Quail board or any NETMF board.
Features :
- event driven
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Other Codes
Downloaded: 229 times
Followed by: 2 users
License: MIT license
Download [195.49KB]This is a C# driver to use the Digipot Click board on the Quail board or any NETMF board.
Features :
- Sets resistance from 0 to 8 KOhm in 1/255 steps
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Audio & Speech
Downloaded: 300 times
Followed by: 2 users
License: MIT license
Download [221.54KB]This is a C# driver to use the Buzz Click board on the Quail board or any NETMF board.
Features :
- Plays melody
- Plays notes (C4, A5, etc…)
- Plays tones
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Measurement
Downloaded: 267 times
Followed by: 3 users
License: MIT license
Download [251.05KB]This is a C# driver to use the STH-11 Click board on the Quail board or any NETMF board.
Features :
- Event driven
- Gets temperature/humidity in a single read
- Change resolution from 8/12 bits to 12/14 bits
WARNING : see http://www.mikrobusnet.org/project/sht11-click
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Measurement
Downloaded: 212 times
Followed by: 3 users
License: MIT license
Download [236.49KB]This is a C# driver to use the Illuminance Click board on the Quail board or any NETMF board.
Features :
- Polling Mode
- Over Sampling
- Altitude – Raw/Sea Level Compensated
- Pressure – Raw/ Sea Level Compensated
- Temperature
- Event Driven
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Measurement
Downloaded: 207 times
Followed by: 3 users
License: MIT license
Download [203.87KB]This is a C# driver to use the Light Click board on the Quail board or any NETMF board.
Features :
- Scaled results
- Raw results
- Light as percentage of full scale
- Voltage of the photodiode
- Number of samples for avering measure
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Timers (Real time clock)
Downloaded: 288 times
Followed by: 1 user
License: MIT license
Download [286.21KB]This is a C# driver to use the RTC Click board on the Quail board or any NETMF board.
Features :
- SetClock
- GetDateTime
- Get/Set RTC configuration
- Use of SRAM to store base year
Author: MikroBUS.NET Team
Last Updated: 2015-04-28
Package Version: 1.0.0.0
Category: Timers (Real time clock)
Downloaded: 269 times
Followed by: 1 user
License: MIT license
Download [222.11KB]This is a C# driver to use the Illuminance Click board on the Quail board or any NETMF board.
Features :
- SetClock
- GetDateTime
- Enable square wave generation function
- Use of SRAM to store user’s datetime infos
