We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: dany
Last Updated: 2015-07-10
Package Version: 2.0.0.0
Example: 1.0.0.0
Category: Other Codes
Downloaded: 706 times
Not followed.
License: MIT license
Download [720.92KB]Purpose: Make people aware about the ways of working that can introduce ram corruption
(and of course how to avoid it). In this document the many ways where it goes right are not mentioned, only the danger areas are highlighted.
Author: S Ss
Last Updated: 2014-12-05
Package Version: 6.4.0.0
Category: Other Codes
Downloaded: 1777 times
Not followed.
License: MIT license
Download [395.23KB]This project is about Product Counter, which counts any object passes the laser.
The user can enter the required number to be counted using keypad. Then
by pressing the start button the system will be activated(Laser will light) and motor will move
then any object passes the laser beam will be counted and displayed on LCD.
Author: Alexander Wolf
Last Updated: 2014-12-06
Package Version: 1.0.0.1
Example: 1.0.0.0
Category: Measurement
Downloaded: 580 times
Followed by: 1 user
License: MIT license
Download [551.13KB]For PIC32 modified code from Mikroelektronikas MPU example.\x0D\x0A
Using TFT drwawing a waterlevel and UART for Output data on FusionBoard.\x0D\x0A
This may help People using I2C PIC32 and EasyPicFusionV7.\x0D\x0A
Don't Forget Pull UP on SCL and SDA :)
Author: Luca Massarelli
Last Updated: 2014-12-04
Package Version: 1.0.0.0
Example: 1.0.0.0
Category: Communication
Downloaded: 1405 times
Not followed.
License: MIT license
Download [238.57KB]I port a simple version of the paho library for embedded system in MikroC compiler.
These example use wifi connection with the wifi plus click module, and can connect to a broker, publish messages and subscribe to a topic.
I use PIC32MX460F512L with EasyPicFusion V7 with MikroC compiler.
Author: Ahmed Khalid
Last Updated: 2014-11-21
Package Version: 1.0.0.0
Category: Measurement
Downloaded: 766 times
Followed by: 2 users
License: MIT license
Download [113.58KB]this project for Hall Current Click to calculate the current in simple way , assuming that the current waveform sine wave and the Freq=50Hz , so the rms value = Ipeak/sqrt(2)
[learn more] Author: MIKROE
Last Updated: 2014-11-21
Package Version: 1.0.0.0
Example: 1.0.0.0
Category: Development Systems
Downloaded: 1175 times
Followed by: 5 users
License: MIT license
Download [2.72KB]Control two relays remotely through simple web interface controller by NODE.js server.
Using BeagleBone (Black), BeagleBone click SHIELD (http://www.mikroe.com/click/beaglebone-shield/) and Relay click (http://www.mikroe.com/click/relay/) board.
Author: S Ss
Last Updated: 2014-11-10
Package Version: 6.4.0.0
Category: Measurement
Downloaded: 1454 times
Followed by: 2 users
License: MIT license
Download [457.68KB]This project uses LM35 sensor that senses the temperature and then turns on Fan if temperature is high and turns on Heater if temperature is low. The Graphic LCD displays temperature value in text and graphically. User can select reference number using buttons. This reference number is compared with the temperature to control Fan or Heater.
Author: Anders Tysk
Last Updated: 2014-10-31
Package Version: 2.0.0.0
Category: Measurement
Downloaded: 1385 times
Followed by: 2 users
License: MIT license
Download [250.15KB]Version 2.0 Added CRC-checksum control. Noticed that the saved min-temperature got error values. The solution was to add CRC-checksum control for the temp values that was read from the senor. Now it´s working good.
[learn more] Author: MIKROE
Last Updated: 2014-10-29
Package Version: 1.0.0.0
Example: 1.0.0.0
Category: Motor Control
Downloaded: 1329 times
Followed by: 3 users
License: MIT license
Download [202.12KB]This is a simple demonstration of using nRF and Stepper click boards for wirelessly controlling the stepper motor. Master module sends command to the slave (ON, OFF, DIRECTION, 1 step, 1/2 step, 1/4 step and 1/8 step). Upon reception, slave processes this command and drives stepper motor.
[learn more] Author: MIKROE
Last Updated: 2014-10-28
Package Version: 1.0.0.0
Example: 1.0.0.0
Category: Communication
Downloaded: 801 times
Not followed.
License: MIT license
Download [79.75KB]This is a simple demonstration of using NEC protocol remote control with the IR click, Relay click and STM32 M4 clicker board. Upon a button press, an appropriate relay will toggle.
