20%
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-15
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 12 times
Not followed.
License: MIT license
Download [735.10KB]10x10 RGB 2 Click is a compact add-on board designed for creating vibrant LED displays and lighting solutions. This board features the IN-PC20TBT5R5G5B, an RGB LED with an advanced IC for seamless operation from Inolux. The board features a 10x10 matrix of smart RGB LEDs capable of dual-wire transmission and a sophisticated control circuit for dynamic color rendering. It incorporates CMOS technology for low power consumption and supports 256 grayscale levels for precise PWM dimming, along with 32 levels of brightness control.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 21 times
Not followed.
License: MIT license
Download [428.70KB]2x2 RGB Click is a compact add-on board that contains a matrix of 4 “intelligent” RGB elements, forming a 2x2 display screen. This board features the KTD2052A, a 12-channel RGB LED driver from Kinetic Technologies. It is a fully programmable current regulator for up to four RGB LEDs (12 LEDs in total). The LED matrix consists of four LRTB GFTG, a 6-lead in-line MULTILEDs, from ams OSRAM. The LEDs have a 120-degree viewing angle.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 51 times
Not followed.
License: MIT license
Download [601.29KB]4x4 RGB 2 Click is a compact add-on board that contains a matrix of 16 intelligent RGB LEDs, forming a 4x4 display screen. This board features 16 IN-PC55TBTRGB, 5x5mm RGB LEDs with an integrated IC from Inolux. The LEDs feature an 8-bit color control in 256 steps (256-level greyscale) and a 5-bit brightness control in 32 steps. The intelligent LEDs are cascaded (daisy-chained); thus, every one of them can communicate with the host MCU using the same data lines.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 40 times
Not followed.
License: MIT license
Download [650.20KB]LED Ring 2 Click is a compact add-on board that provides a circular-shaped electronic lighting solution. This board features three I2C-configurable high-performance LED matrix drivers, the LP5862 from Texas Instruments. The LP5862 integrates 18 constant current sinks for driving 18 yellow LEDs. With the help of two additional LP5862 drivers, it is possible to realize, as shown on this board, a solution of 54 yellow LEDs arranged in a circular pattern. In addition, it also provides excellent PWM dimming effects.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 128 times
Not followed.
License: MIT license
Download [652.09KB]8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs. This board features the AS1115, compact LED driver for 8x8 display screen programmed via a compatible 2-wire I2C interface from ASM-AG.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 72 times
Not followed.
License: MIT license
Download [653.17KB]Matrix G click is a mikroBUS add-on board with two green 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers. The active area of each matrix is 7.62mm high and 5.08 mm wide. 7x5 is a standard resolution for displaying ASCII characters, so the click is essentially a dual-character display capable of showing letters in more readable typefaces compared to a 14-segment display. The click communicates with the target MCU through the mikroBUS SPI interface with two separate Chip Select lines for each matrix (CSL for the left, CSR for the right). This board is designed to use a 5V power supply.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 98 times
Not followed.
License: MIT license
Download [631.34KB]Matrix R click is a mikroBUS add-on board with two red 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers. The active area of each matrix is 7.62mm high and 5.08 mm wide. 7x5 is a standard resolution for displaying ASCII characters, so the click is essentially a dual-character display capable of showing letters in more readable typefaces compared to a 14-segment display. The click communicates with the target MCU through the mikroBUS:tm: SPI interface with two separate Chip Select lines for each matrix (CSL for the left, CSR for the right). This board is designed to use a 5V power supply.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 100 times
Not followed.
License: MIT license
Download [628.00KB]7x10 Y click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are optically isolated from each other and there is no light bleeding between the adjacent LED cells. Additionally, turn-on and turn-off times of the matrix cells are optimized for a clean and fluid display performance, with no flickering or lag.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 97 times
Not followed.
License: MIT license
Download [676.34KB]7x10 R click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are optically isolated from each other and there is no light bleeding between the adjacent LED cells. Additionally, turn-on and turn-off times of the matrix cells are optimized for a clean and fluid display performance, with no flickering or lag.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 94 times
Not followed.
License: MIT license
Download [665.50KB]7x10 G click is a LED dot matrix display click, which can be used to display graphics or letters in a very simple and easy way. The click board has two LED dot matrix modules with 7x5 stylish, round, dot-like LED elements. These displays produce clean and uniform patterns since the elements are optically isolated from each other and there is no light bleeding between the adjacent LED cells. Additionally, turn-on and turn-off times of the matrix cells are optimized for a clean and fluid display performance, with no flickering or lag.
[learn more] 
