We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 68 times
Not followed.
License: MIT license
Download [608.91KB]FTDI Click is a compact add-on board that provides a high-speed USB to a serial interface converter. This board features the FT2232H, a 5th-generation high-speed USB 2.0 to a serial UART/I2C/SPI interface converter from FTDI. The entire USB protocol is handled on the chip (FTDI USB drivers required), making this board ideal for various USB applications. Besides a selectable interface and a standalone operation possibility, it also includes an EEPROM which contains the USB configuration descriptors for the FT2232H and one DA converter for additional reference in user-configurable applications.
[learn more]
Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.8
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 98 times
Not followed.
License: MIT license
Download [11.56KB] Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.9
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 132 times
Not followed.
License: MIT license
Download [13.72KB] Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.10
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 140 times
Not followed.
License: MIT license
Download [10.08KB] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 117 times
Not followed.
License: MIT license
Download [599.67KB]USB UART ISO Click is a compact add-on board that offers a completely isolated differential pair of lines of the USB physical interface. This board features the ISOUSB111, a full/low-speed isolated USB repeater from Texas Instruments. It is a USB 2.0-compliant device that supports low-speed (1.5Mbps) and full-speed (12Mbps) signaling, USB On-The-Go (OtG), and Type-C Dual Role Port (DRP). In addition, this Click board™ comes with the FT232R, a USB UART IC from FTDI, making it a complete USB-to-UART isolated solution.
[learn more] Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.14
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 243 times
Not followed.
License: MIT license
Download [8.03KB] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 91 times
Not followed.
License: MIT license
Download [542.32KB]USB MUX Click is a compact add-on board with a high-bandwidth switch designed for switching and isolating high-speed USB 2.0 signals in systems with limited USB I/Os. This board features the TS3USB30E, a USB 2.0 1:2 multiplexer/demultiplexer switch with a single enable from Texas Instruments.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 169 times
Not followed.
License: MIT license
Download [519.53KB]USB UART 5 Click is a compact add-on board with a general-purpose USB to UART serial interface. This board features the CP2110, a highly-integrated USB-to-UART bridge controller from Silicon Labs. The CP2110 uses the standard USB HID device class, requiring no custom driver and a UART interface that implements all RS-232 signals, including control and hardware handshaking, so existing system firmware does not need to be modified. The UART capabilities of the CP2110 also include baud rate support from 300 to 1Mbps, hardware flow control, RS-485 support, and GPIO signals that are user-defined for status and control information.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 237 times
Not followed.
License: MIT license
Download [486.28KB]USB to I2C 2 Click is a compact add-on board that contains a general-purpose USB to I2C serial interface. This board features the FT201X, a full-speed USB to I2C protocol converter from FTDI. The FT201X converts USB2.0 full-speed to an I2C serial interface capable of operating up to 3.4MBit/s, with low power consumption (typical 8mA). The entire USB protocol is handled on the chip itself, where no USB-specific firmware programming is required. It also has a fully-integrated 2048 byte Multi-Time-Programmable (MTP) memory for storing device descriptors and CBUS I/O user-desirable configuration. This Click board™ includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an I2C interface.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.15
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 232 times
Not followed.
License: MIT license
Download [480.83KB]USB UART 4 Click offers a USB to asynchronous serial data (UART) interface, allowing the microcontroller based designs to communicate with the personal computer, in a very simple way. It is equipped with the FT232RL, a very popular USB to UART interface IC, used on many MikroElektronika devices - both for its reliability and simplicity. USB UART Click is used for whenever there is a need to seamlessly and effortlessly interface the UART lines to a personal computer
[learn more] 
