TOP Contributors

  1. MIKROE (2784 codes)
  2. Alcides Ramos (405 codes)
  3. Shawon Shahryiar (307 codes)
  4. jm_palomino (133 codes)
  5. Bugz Bensce (97 codes)
  6. S P (73 codes)
  7. dany (71 codes)
  8. MikroBUS.NET Team (35 codes)
  9. NART SCHINACKOW (34 codes)
  10. Armstrong Subero (27 codes)

Most Downloaded

  1. Timer Calculator (141361 times)
  2. FAT32 Library (74205 times)
  3. Network Ethernet Library (58776 times)
  4. USB Device Library (48854 times)
  5. Network WiFi Library (44564 times)
  6. FT800 Library (44149 times)
  7. GSM click (30883 times)
  8. mikroSDK (29739 times)
  9. PID Library (27372 times)
  10. microSD click (27309 times)
Libstock prefers package manager

Package Manager

We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]

< Back
mikroSDK Library

Charger click

Rating:

2

Author: MIKROE

Last Updated: 2019-05-23

Package Version: 1.0.0.1

mikroSDK Library: 1.0.0.0

Category: Battery Charger

Downloaded: 5956 times

Followed by: 4 users

License: MIT license  

Charger click carries both a battery charger controller and a battery charge monitor. The smaller chip is MCP73831, a single-cell Li-Ion and Li-Polymer charge management controller. The larger IC is DS2438, a smart battery monitor. The monitor communicates with the MCU through a 1-Wire interface. The click is designed to use a 5V power supply.

No Abuse Reported

Do you want to subscribe in order to receive notifications regarding "Charger click" changes.

Do you want to unsubscribe in order to stop receiving notifications regarding "Charger click" changes.

Do you want to report abuse regarding "Charger click".

  • mikroSDK Library 2.0.0.0
  • Comments (2)
DOWNLOAD LINK RELATED COMPILER CONTAINS
mikroBasic PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc

mikroSDK Library Blog

Charger Click Board

Charger Click Board

Front and back view of Charger Click board designed in mikroBUS form factor.

View full image

Library Description

The library covers all the necessary functions to control Charger click board. The library performs the communication with the device via 1-Wire protocol by writing to registers and by reading from registers.

Key functions:

  • void  charger_gpioDriverInit (T_CHARGER_P gpioObj) - Function initializes GPIO driver for the desired MIKROBUS1.

Examples description

The application is composed of the three sections :

  • System Initialization - Initializes GPIO structures and start to write log.
  • Application Initialization - Initialization driver enables - GPIO, and start One Wire communication, also write log.
  • Application Task - This is an example which demonstrates the use of Charger click board. Charger click communicates with register via One Wire protocol by the write to register and read from the register and display charger information from the DS2438 Smart Battery Monitor. Results are being sent to the Usart Terminal where you can track their changes. All data logs write on USB uart changes for every 1 sec.
void applicationTask()
{
    charger_getBatteryVoltage();
    Delay_100ms();

    mikrobus_logWrite( " Battery Voltage  : ", _LOG_TEXT );
    FloatToStr( batteryVoltage, logText );
    mikrobus_logWrite( logText, _LOG_TEXT );
    mikrobus_logWrite( " V", _LOG_LINE );

    mikrobus_logWrite( " Charger Current  : ", _LOG_TEXT );
    FloatToStr( chargerCurrent, logText );
    mikrobus_logWrite( logText, _LOG_TEXT );
    mikrobus_logWrite( " mA", _LOG_LINE );

    charger_getBatteryCapacity();
    Delay_100ms();

    mikrobus_logWrite( " Charger Capacity : ", _LOG_TEXT );
    FloatToStr( chargerCapacity, logText );
    mikrobus_logWrite( logText, _LOG_TEXT );
    mikrobus_logWrite( " mAhr", _LOG_LINE );

    mikrobus_logWrite( "---------------------------------", _LOG_LINE );
    Delay_1sec();
}

Additional Functions :

  • void charger_start() - Start and init DS2438 Smart Battery Monitor.
  • void charger_getBatteryVoltage() - Read sensor data for battery voltage and charger current.
  • void charger_getBatteryCapacity() - Read sensor data for charger capacity.
  • void charger_getBatteryLifetime() - Read sensor data for lifetime charge capacity.

Other mikroE Libraries used in the example:

  • One_Wire
  • UART​
  • Conversion

Additional notes and informations

Depending on the development board you are using, you may need USB UART clickUSB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.

ALSO FROM THIS AUTHOR

IR distance Click

0

IR distance Click carries Sharp’s GP2Y0A60SZ0F distance measuring sensor, which comprises of an integrated PSD (position sensitive detector), an infrared LED and a signal processing circuit. The measuring range is between 10 and 150 cm. The Click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over RST and AN pin on the mikroBUS™ line.

[Learn More]

Boost 11 Click

0

Boost 11 Click is a compact add-on board that boosts low input voltages to a stable output. This board features the XCL105B331H2-G, a synchronous step-up DC/DC converter from TOREX Semi. It operates from an input voltage as low as 0.9V, ideal for devices using single Alkaline or Nickel-metal hydride batteries, with an output fixed at 3.3V. It features an EN pin for easy start-up and standby mode and supports both 3.3V and 5V logic levels. This versatility makes Boost 11 Click suitable for industrial equipment, IoT devices, wearables, and applications prioritizing battery life.

[Learn More]

ADAC Click

0

The Click is designed to run on either 3.3V or 5V power supply. ADAC Click communicates with the target microcontroller over I2C interface, with additional functionality provided by the RST pin on the mikroBUS™ line.

[Learn More]