We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2018-11-14
Package Version: 1.0.0.1
mikroSDK Library: 1.0.0.0
Category: Magnetic
Downloaded: 5391 times
Followed by: 5 users
License: MIT license
Magneto click carries an AS5048A contactless magnetic angle position sensor. The sensing circuitry relies on the Hall Effect to detect the vector of a nearby magnetic field in a 360º two-dimensional plane parallel to the surface of the chip. AS5048A delivers precise angle measurements down to 0.05º in 14-bit resolution.
UPS 3 Click is a compact add-on board that represents a bidirectional active charge/balancing solution. This board features the LTC3110, a bidirectional buck-boost DC/DC regulator/charger combination with selectable operation modes for charging and system backup from Analog Devices. It can autonomously transition from Charge to Backup mode or switch modes based on an external command. A proprietary low noise switching algorithm optimizes efficiency with capacitor/battery voltages above, below, or equal to the system output voltage. Additional features include voltage supervisors for direction control and end of a charge and a general-purpose comparator with open-collector output for interfacing with MCU. This Click board™ is suitable for a backup power source for a wide range of battery-operated embedded applications.
[Learn More]Control two relays remotely through your Android smartphone using Raspberry Pi, Pi click shield (www.mikroe.com/click/pi-shield/) and Relay click (www.mikroe.com/click/relay/) board.
[Learn More]H-Bridge Driver Click is a compact add-on board that contains an H-bridge gate driver, also known as a full-bridge pre-driver. This board features the MC33883, an H-Bridge gate driver with an integrated charge pump and independent high and low side gate drive channels from NXP Semiconductors.
[Learn More]You have unsaved changes. If you choose to leave all changes will be discarded.
Do you want to subscribe in order to receive notifications regarding "Magneto click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Magneto click" changes.
Do you want to report abuse regarding "Magneto click".