We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2018-09-17
Package Version: 1.0.0.0
mikroSDK Library: 1.0.0.0
Category: Motion
Downloaded: 4453 times
Not followed.
License: MIT license
Accel 5 click features an ultra-low power triaxial accelerometer sensor, labeled as the BMA400. This Click board allows linear motion and gravitational force measurements in ranges of ±2 g, ±4 g, ±8, and ±16 g in three perpendicular axes.
Do you want to subscribe in order to receive notifications regarding "Accel 5 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Accel 5 click" changes.
Do you want to report abuse regarding "Accel 5 click".
Library Description
The library initializes and defines the I2C bus driver and drivers that offer a choice for writing data in register.
The library includes function for read X/Y/Z axis data, read sensor time and detect tap on the chip and function for read temperature data.
The user also has the function for initializes chip and software reset.
Key functions:
int16_t accel5_getAxis(uint8_t axis)
- Functions for read axis datauint8_t accel5_init(uint8_t mode, uint8_t range)
- Functions for initialize the chipvoid accel5_writeByte(uint8_t reg, uint8_t _data)
- Functions for write one byte in registerExample description
The application is composed of three sections :
System Initialization - Initializes I2C module
Application Initialization - Initializes Driver init and settings accelerometer data range and mode
Application Task - (code snippet) - Reads the accel X / Y / Z axis data, every 500 ms.
void applicationTask()
{
X_axisData = accel5_getAxis( _ACCEL5_X_AXIS );
mikrobus_logWrite(" X axis : ", _LOG_TEXT );
IntToStr(X_axisData, demoText);
mikrobus_logWrite(demoText, _LOG_LINE );
Y_axisData = accel5_getAxis( _ACCEL5_Y_AXIS );
mikrobus_logWrite(" Y axis : ", _LOG_TEXT );
IntToStr(Y_axisData, demoText);
mikrobus_logWrite(demoText, _LOG_LINE );
Z_axisData = accel5_getAxis( _ACCEL5_Z_AXIS );
mikrobus_logWrite(" Z axis : ", _LOG_TEXT );
IntToStr(Z_axisData, demoText);
mikrobus_logWrite(demoText, _LOG_LINE );
mikrobus_logWrite( " ", _LOG_LINE );
Delay_ms( 500 );
}
Other MikroElektronika libraries used in the example:
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.