We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2019-07-11
Package Version: 1.0.0.0
mikroSDK Library: 1.0.0.0
Category: Sub-1 GHz Transceivers
Downloaded: 3156 times
Not followed.
License: MIT license
EnOcean 3 Click carries a ultra-low power TCM515 transceiver gateway module which operates at 868MHz radio band, perfectly suited for the realization of transceiver gateways, actuators and controllers for systems communicating based on the EnOcean radio standard.
Do you want to subscribe in order to receive notifications regarding "EnOcean 3 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "EnOcean 3 click" changes.
Do you want to report abuse regarding "EnOcean 3 click".
Library Description
The library initializes and defines the I2C bus driver and drivers that offer a choice for read data form register. The library includes function for read Temperature data and function for read and set temperature hysteresis and limit. The user also has the function for configuration chip and read Interrupt (INT pin) state.
Key functions:
void enocean3_response_handler_set( void ( *handler )( T_enocean3_packet*, uint16_t* ) )
- Function sets handler on the function that should be performed.void enocean3_uart_isr( void )
- Function reads every single byte from the device, performs a crc8 check for header and data packet and makes a received response.uint8_t enocean3_sendPacket( T_enocean3_packet *packet )
- Function sends a packet data to the device by using UART interface.Examples description
The application is composed of three sections :
void applicationTask()
{
checkResponse();
}
Additional Functions :
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.