We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2019-07-05
Package Version: 1.0.0.0
mikroSDK Library: 1.0.0.0
Category: Temperature & humidity
Downloaded: 4010 times
Not followed.
License: MIT license
Thermo 15 Click is a Click board equipped with the sensor IC, which can digitize temperature measurements between -55°C and +125°C so that the temperature measurement data can be processed by the host MCU. Thermo 15 click provides an accuracy of ±1°C in the range from 0°C to 70°C.
Do you want to subscribe in order to receive notifications regarding "Thermo 15 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Thermo 15 click" changes.
Do you want to report abuse regarding "Thermo 15 click".
Library Description
The library initializes and defines the I2C bus driver and drivers that offer a choice for read data form register. The library includes function for read Temperature data and function for read and set temperature hysteresis and limit. The user also has the function for configuration chip and read Interrupt (INT pin) state.
Key functions:
float thermo15_getAmbientTemperatureData(uint8_t tempIn)
- Ambient temperature data.void thermo15_setTempRegister(uint8_t tempReg, float temp)
- Set temperature register.void thermo15_configuration(uint8_t cfgData)
- Configuration register.Examples description
The application is composed of three sections :
void applicationTask()
{
float Temperature;
Temperature = thermo15_getAmbientTemperatureData( _THERMO15_TEMP_IN_CELSIUS );
FloatToStr(Temperature, demoText);
mikrobus_logWrite("** Temperature : ", _LOG_TEXT);
mikrobus_logWrite(demoText, _LOG_LINE);
mikrobus_logWrite( " ---------------------------- ", _LOG_LINE);
Delay_ms( 1500 );
}
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.