TOP Contributors

  1. MIKROE (2784 codes)
  2. Alcides Ramos (405 codes)
  3. Shawon Shahryiar (307 codes)
  4. jm_palomino (133 codes)
  5. Bugz Bensce (97 codes)
  6. S P (73 codes)
  7. dany (71 codes)
  8. MikroBUS.NET Team (35 codes)
  9. NART SCHINACKOW (34 codes)
  10. Armstrong Subero (27 codes)

Most Downloaded

  1. Timer Calculator (141339 times)
  2. FAT32 Library (74183 times)
  3. Network Ethernet Library (58761 times)
  4. USB Device Library (48850 times)
  5. Network WiFi Library (44560 times)
  6. FT800 Library (44145 times)
  7. GSM click (30881 times)
  8. mikroSDK (29724 times)
  9. PID Library (27368 times)
  10. microSD click (27305 times)
Libstock prefers package manager

Package Manager

We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]

< Back
mikroSDK Library

I2C Isolator click

Rating:

5

Author: MIKROE

Last Updated: 2019-05-24

Package Version: 1.0.0.0

mikroSDK Library: 1.0.0.0

Category: I2C

Downloaded: 3861 times

Not followed.

License: MIT license  

I2C Isolator click carries ISO1540, a low-power, bidirectional isolator compatible with I2C interfaces.

No Abuse Reported

Do you want to subscribe in order to receive notifications regarding "I2C Isolator click" changes.

Do you want to unsubscribe in order to stop receiving notifications regarding "I2C Isolator click" changes.

Do you want to report abuse regarding "I2C Isolator click".

  • mikroSDK Library 2.0.0.0
  • Comments (0)
DOWNLOAD LINK RELATED COMPILER CONTAINS
mikroBasic PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroBasic PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroC PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for ARM
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for AVR
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for dsPIC30/33 & PIC24
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for FT90x
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for PIC
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc
mikroPascal PRO for PIC32
  • lib
  • src
  • exa
  • hlp
  • hex
  • sch
  • pcb
  • doc

mikroSDK Library Blog

Library Description

The library covers all the necessary functions to control I2C Isolator click board.
The library performs the communication with the device via I2C protocol by writing to registers and by reading from registers.

Key functions:

  • void i2cisolator_writeByte( uint8_t regAddress, uint8_t writeData ) - Generic write the byte of data function.
  • uint8_t i2cisolator_readByte( uint8_t regAddress ) - Generic read the byte of data function.
  • void i2cisolator_writeBytes( uint8_t regAddress, uint8_t *writeData, uint8_t nBytes ) - Generic sequential data write function.

Examples description

The application is composed of the three sections :

  • System Initialization - Initializes I2C, LOG structures and start to write log.
  • Application Initialization - Initialization driver enables - I2C, sets the configuration of TMP007 sensor on IrThermo 2 click and start to write log.
  • Application Task - This is an example which demonstrates the use of I2C Isolator Click board. In this example, we use IrThermo 2 click measures the temperature and calculate the temperature in degrees Celsius [ °C ]. Results are being sent to the USART Terminal where you can track their changes. All data logs on usb uart for approximately every 1 sec when the data value changes.
void applicationTask()
{
    i2cisolator_getTemperature();
    Delay_100ms();

    FloatToStr( temperature, logText );
    mikrobus_logWrite( " Temperature : ", _LOG_TEXT );
    mikrobus_logWrite( logText, _LOG_TEXT );
    mikrobus_logWrite( degCel, _LOG_LINE );
    mikrobus_logWrite( "---------------------------", _LOG_LINE );
    Delay_1sec();
}

Additional Functions :

  • void i2cisolator_getTemperature() - Function calculate temperature in degrees Celsius.

Other mikroE Libraries used in the example:

  • I2C
  • UART
  • Conversions

Additional notes and informations

Depending on the development board you are using, you may need USB UART clickUSB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.

ALSO FROM THIS AUTHOR

EERAM 3v3 Click

0

EERAM 3.3V Click is a static RAM (SRAM) memory Click board™ with the unique feature - it has a backup non-volatile memory array, used to store the data from the SRAM array. Since the SRAM is not able to maintain its content after the power loss, the non-volatile EEPROM backup can be a very handy addition that can be used to preserve the data, even after the power loss event. This is a very useful feature when working with critical or sensitive applications. The memory backup procedure can be executed both automatically and manually. When it is set to work in the manual mode, the onboard capacitor will act as a power source with enough power to complete the backup cycle. The power-on backup restore mode is also available, taking only about 25ms to complete.

[Learn More]

RN4678 Click

0

RN4678 Click carries the RN4678 Bluetooth® 4.2 dual mode module from Microchip. The Click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C and UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: AN, RST, CS, PWM, INT.

[Learn More]

Relay 6 Click

0

Relay 6 Click is a compact add-on board for precise load control and monitoring applications. This board features four 9913-05-20TRs, a reed relay from Coto Technology, well-known for its ultra-miniature SMD design, which offers the smallest footprint in the market. These four relays each have four load connection terminals and blue LED indicators that signal the operational status, ensuring clear and immediate feedback.

[Learn More]