We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2020-06-04
Package Version: 1.0.0.0
mikroSDK Library: 1.0.0.0
Category: Temperature & humidity
Downloaded: 2355 times
Not followed.
License: MIT license
Thermo 14 Click uses the STTS22H digital temperature sensor and thermal watchdog, which can measure temperature measurements between -40°C and +125°C so that the temperature measurement data can be processed by the host MCU. Thermo 14 click provides an accuracy of ±0.5°C in the range from -10°C to 60°C.
Do you want to subscribe in order to receive notifications regarding "Thermo 14 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Thermo 14 click" changes.
Do you want to report abuse regarding "Thermo 14 click".
Library Description
The library covers all the necessary functions that enables the usage of the Thermno 14 Click board. It holds functions that allow full control of the device to the user. User can calibrate the device, read temperature or read raw values if necessary.
Key functions:
float thermo14_get_temperature ( );
- Function is used to get the temperature.float thermo14_raw_to_celsius ( int16_t temp_raw );
- Function is used to perform necessary calculacion in order to get temperature freom raw data.int16_t thermo14_temp_raw_get ( );
- Function is used to get the raw value.Examples description
The application is composed of three sections :
void application_task ( )
{
temp_val = thermo14_get_temperature( );
mikrobus_logWrite( " Temperature: ", _LOG_TEXT );
log_display( temp_val );
mikrobus_logWrite( deg_cel, _LOG_LINE );
mikrobus_logWrite( "----------------------", _LOG_LINE );
Delay_ms( 3000 );
}
Additional Functions :
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.