Library Description

The library covers all the necessary functions that enables the usage of the ISO ADC 3 Click board™. It offers reading raw data from output register and calculations that result in relatively accurate measurement of the ADC's voltage level.

Key functions:

• uint16_t isoadc3_read_data ( ); - Function is used to read raw data from MCP3221.
• uint16_t isoadc3_read_voltage ( uint16_t v_ref ); - Function is used to calculate the ADC's voltage level.

Examples description

The application is composed of three sections :

• System Initialization - Initializes I2C module and LOG structure.
• Application Initialization - Initalizes I2C driver and makes an initial log.
• Application Task - This example shows the capabilities of the ISO ADC 3 Click board™ by measuring ADC voltage level. In order to get correct calculations user should change "v_ref" value to his own power supply voltage.

void application_task ( )
{
    voltage = isoadc3_read_voltage( v_ref );
    WordToStr( voltage, log_txt );
    mikrobus_logWrite( "ADC voltage Level: ", _LOG_TEXT );
    mikrobus_logWrite( log_txt, _LOG_TEXT );
    mikrobus_logWrite( "mV", _LOG_LINE );

    mikrobus_logWrite( "------------------------", _LOG_LINE );
    Delay_ms( 1000 );
}

Other mikroE Libraries used in the example:

• I2C
• UART
• Conversions

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.